Timing 350 on alky

[fbt551]

Im currently running +5 on my plate all stock ignition on my alky 350 17cc domes does that sound about right?

[trickedcarbine]

Pretty close. You can actually read timing on the plugs though to be sure. You can probably get away with +7. What series plug are you running , 8's or 9's?

[fbt551]

B9egv last times I was at the track running 34mm pjs same set up couldnt really get a good reading on the plugs think might have been running rich 2.5-3 turns out on power jets

[#1JUANstunna]

Mine loves the timing plate maxed out.

[fbt551]

Damn havent tried that lol

[fbt551]

Guess ill have to go out and mess with it til I get it right

[#1JUANstunna]

You want your timing mark on the strap of the plug in the middle of the bend. Make sure as you advance the timing you give it more fuel.

[Surfrjag]

Mine liked +8

[fbt551]

Ill have to go back out when I put it back together ill upload pics of plugs is it ok to run br9es for tuning? Amd switch tl b9egv when tuned? Br9es are alot cheaper haha

[trickedcarbine]

Nothing wrong with the br9es

[sleeper06]

Tune it with whatever plug u plan on running,I run br9es on all alky set ups

[m671054]

You run resistor caps and plugs? Not just a b9es? Those egv plugs eat motors easier than es

[trickedcarbine]

And make sure to get solid cap plugs . Not those dumb ass screw on tops. Those things have ruined a race or two.

[fbt551]

Ya ill tune on br9es and run them next time