fbt551 Posted July 30, 2014 Report Posted July 30, 2014 What power diffrence would I see going from my t5s on my ported 350 going to rocket big bore pipes? Running 198* exhaust and I believe 130* on the transfers on a stock bore stock stroke bike on alky Quote
Nightmare Posted July 30, 2014 Report Posted July 30, 2014 I put rockets on my 350 just to ride around while my oof were being repaired and it falls hard, even messed with the jetting. Big bore pipes are for big motors (10 mill +). I'll be selling my rockets in the next 2 weeks. Quote
BANSHEEBEEFM2M Posted July 31, 2014 Report Posted July 31, 2014 Nightmare 350 lmk when u sell them Quote
Zillaguy Posted August 1, 2014 Report Posted August 1, 2014 (edited) Rockets are small bore pipes... They work best on ported motors with bores 68mm or smaller... From what Tom said they like higher port times too. Edited August 1, 2014 by Zillaguy Quote
trickedcarbine Posted August 1, 2014 Report Posted August 1, 2014 Rockets are small bore pipes... They work best on ported motors with bores 68mm or smaller... From what Tom said they like higher port times too.They most definitely do like the exhaust to have a ridiculous duration. Short of upper 190's and you will notice a definite flat top end on them. Been thinking of messing with the stinger diameter to see if that can be fudged around or if it will also allow for use on motors with a bit more displacement. Sent from my iPhone using Tapatalk - now Free 1 Quote
Zillaguy Posted August 2, 2014 Report Posted August 2, 2014 I'm running 196ex 128tr with Rocket R1's. The power comes on just into the midrange and pulls all the way to the top... Best mod i've done so far, except for the porting and 4 mill. Quote
Nightmare Posted August 2, 2014 Report Posted August 2, 2014 I'm running 196ex 128tr with Rocket R1's. The power comes on just into the midrange and pulls all the way to the top... Best mod i've done so far, except for the porting and 4 mill.Thanks! Sent from my XT1080 using Tapatalk Quote
possum Posted August 2, 2014 Report Posted August 2, 2014 nice comment from borrink. Sounds like he knows porting and what his pipe likes. A+ Quote
fbt551 Posted August 12, 2014 Author Report Posted August 12, 2014 these are the pipes was told big bore any suggestions? How to tell diff? Quote
locogato11283 Posted August 12, 2014 Report Posted August 12, 2014 What's the inside diameter of the rear part of the expansion chamber? Quote
fbt551 Posted August 12, 2014 Author Report Posted August 12, 2014 What's the inside diameter of the rear part of the expansion chamber?Im not sure havent gone to see them what would size be bb vs sb? That way I can know when I go see them. Also do they look like rockets? Quote
fbt551 Posted August 12, 2014 Author Report Posted August 12, 2014 Rockets they are not.You havean idea of what they could be? Vitos? Quote
Nightmare Posted August 12, 2014 Report Posted August 12, 2014 Vito's resemble shearers, GRR maybe? Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.