ZILLAKILLA Posted June 1, 2014 Report Posted June 1, 2014 I was just trying to figure out a close est. hp number for my bike. Here's the mods. 0.30 over w/ Weisco Pistons, ported & polished jugs, +4 timing, Tors elim., stock bottom end, LRD Adj. Race Pipes, rebuilt carbs, Pro Design Cool Heads w/ 20 cc domes. Run 50/50 mix Pump gas 93 & Race 110-112 Quote
Sandking Posted June 1, 2014 Report Posted June 1, 2014 Ask the builder that ported the jugs. Or have it dynoed. Sent from my SCH-I535 using Tapatalk Quote
WINDYCITYJOHN400 Posted June 1, 2014 Report Posted June 1, 2014 Polished and ported is too vague. Polished what?....... Quote
sstaton1983 Posted June 1, 2014 Report Posted June 1, 2014 45 to 65.. Maybe somewhere in between... Quote
WINDYCITYJOHN400 Posted June 1, 2014 Report Posted June 1, 2014 45 to 65.. Maybe somewhere in between... If Passion ported that cylinder…..It might be 5 less than stock. Quote
SAVAGE420 Posted June 1, 2014 Report Posted June 1, 2014 Polished and ported is too vague. Polished what?....... Polished knob and ported holes. 1 Quote
03DMshee Posted June 2, 2014 Report Posted June 2, 2014 Im gonna polish my knob tonight! I used to just port it but im going all out tonight! Quote
bluebanshee98 Posted June 2, 2014 Report Posted June 2, 2014 Im gonna polish my knob tonight! I used to just port it but im going all out tonight!Remember the end result is all about how much you rub it Quote
possum Posted June 2, 2014 Report Posted June 2, 2014 If Passion ported that cylinder…..It might be 5 less than stock. this is never gonna die. haha Quote
Frankthetank Posted June 3, 2014 Report Posted June 3, 2014 I usually do the porting, but the wife has a great feel for polishing. My guess 58hp. 1 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.