mxdinosaur Posted March 9, 2014 Report Posted March 9, 2014 I just went riding and hit a whoop really hard. The bike then started to bog on the right cylinder everytime I hit some bumps after that. It will pull clean on flat ground, but when I hit some whoops, the right cylinder wants to cut out. I run stock carbs with a twist throttle. I have never had this problem before. I checked the plug wires, and they were snapped on. Any ideas? Quote
Pasi S. Posted March 9, 2014 Report Posted March 9, 2014 Check intake boots. I had a small cut and it did the same. Quote
mxdinosaur Posted March 10, 2014 Author Report Posted March 10, 2014 definately gonna check intake boots, running a toomey air filter setup. May have cracked an intake. what level should the floats be at? Quote
uman1030 Posted March 10, 2014 Report Posted March 10, 2014 what level should the floats be at? 20mm-22mm Quote
Jasonc Posted March 16, 2014 Report Posted March 16, 2014 Check for the brass washer under the main jet that hold the " emulsion?" Tube in place, with out them the tube can slide up into the carb throat and cause a bog Sent from my iPhone using Tapatalk Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.