Tony Doukas Racing Posted March 5, 2014 Report Posted March 5, 2014 Took this out of a customers atv that has been sitting indoors for years . Serial # 16,270 so it was one of the last cranks that I rebuilt. That is how many crankshafts we rebuilt in the days. Stock outside OEM webs, Hot Rods forged inner webs that are rebuildable, hot rods connecting rods, and NTN bearings. Welded in the center. $ 175.00 shipped. 1 Quote
Starwriter Posted March 5, 2014 Report Posted March 5, 2014 So, is that a hollow pin in the bearings that goes into the oil hole in the cases? Sounds like a cool idea. I bet it's tricky to get lined up right in the cases. Quote
Tony Doukas Racing Posted March 5, 2014 Author Report Posted March 5, 2014 They are locating pins just like the OEM Yamaha crank. They have to be positioned in the groves at the seam of the cases. Quote
sprinklerman Posted March 5, 2014 Report Posted March 5, 2014 Nice crank for somebody. OEM webs and HR rods is the best of both worlds. Sent from a van down by the river Quote
BANSHEEBEEFM2M Posted March 5, 2014 Report Posted March 5, 2014 Send the invoice to smoppin@hotmail .com my buddy wants it bad hell pay now Sent from my N8000_WHTE_CKT using Tapatalk Quote
Tony Doukas Racing Posted March 5, 2014 Author Report Posted March 5, 2014 OK sending invoice SOLD!! Quote
BANSHEEBEEFM2M Posted March 5, 2014 Report Posted March 5, 2014 Ok thank you very much sir Sent from my N8000_WHTE_CKT using Tapatalk Quote
BANSHEEBEEFM2M Posted March 5, 2014 Report Posted March 5, 2014 Haven't got the invoice yet [email protected] or 2096751352 Sent from my N8000_WHTE_CKT using Tapatalk Quote
Tony Doukas Racing Posted March 5, 2014 Author Report Posted March 5, 2014 shows it went but paypal is slow right now. Quote
BANSHEEBEEFM2M Posted March 26, 2014 Report Posted March 26, 2014 Ship it Sent from my HTC One V using Tapatalk Quote
booxzzy Posted May 20, 2018 Report Posted May 20, 2018 Took this out of a customers atv that has been sitting indoors for years . Serial # 16,270 so it was one of the last cranks that I rebuilt. That is how many crankshafts we rebuilt in the days. Stock outside OEM webs, Hot Rods forged inner webs that are rebuildable, hot rods connecting rods, and NTN bearings. Welded in the center. $ 175.00 shipped. Is this still available and if so, how much would it be to be shipped to Clarkson 6030, Western Australia?Sent from my ONEPLUS A3000 using Tapatalk Quote
kawa110 Posted May 20, 2018 Report Posted May 20, 2018 This is one of those overdue to be deleted threads.... Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.