Jump to content

Recommended Posts

Posted

I seem to have a problem hitting what feels like neutral between 2nd and 3rd happens occasionally in drags and some times it does the same goin through trails. What can i do to fix this issue

 

Sent from my GT-S5360L using Tapatalk 2

Posted

adjust your ecentric bolt correctly. when mine wasn't adjusted correctly it would hang in between gears

Posted

Where is it located,how do i adjust it properly

 

Sent from my GT-S5360L using Tapatalk 2

Posted

What is the pro mod it might already be done by the owner before me he was talkin about a mod he had done to the transmission

 

Sent from my GT-S5360L using Tapatalk 2

Posted

What is the pro mod it might already be done by the owner before me he was talkin about a mod he had done to the transmission

 

Sent from my GT-S5360L using Tapatalk 2

promod is when they cut your trans to make it shift easier while still allowing for normal operation and no damage from backloading it. Over ride transmissions which are more geared toward racing you can NOT backload or it can cause damage and bend the shift forks. If you had an override and you were backloading it the shift forks may be bent and that could be whats causing your issue.

 

did your trans shift from nuetral and down or did it have the normal neutral inbetween 1st and 2nd? how many gears did it have?

Posted

I have six gears and i have a normal neutral between 1st and 2nd. I think thats what he had done. He said it has the shift star mod done

 

Sent from my GT-S5360L using Tapatalk 2

Posted

shift star is a very basic mod they just grind off some of the star points to make it a little easier to shift. That is not exactly a promod tranny but usually part of it

Posted

Ok and i realized what bolt is the eccentric now. dont you have to pull the clutch basket to get to it

 

Sent from my GT-S5360L using Tapatalk 2

Posted

yes, you would need to remove your basket. when i did mine i couldn't get it to adjust well because the spring on the shift shaft that makes contact with the eccentric screw had grooves worn on either side in it so i bought a good condition used shift shaft assembly. also you adjust it while in gear not in neutral.

Posted

Pull trans

Send to redline

Get pro mod

Get new eccentric, locking tab, shift shaft, shift pro

Install

Thank me later

 

Or check your eccentric and shift shaft.

^ this

Also add the modded shift shaft from fast.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...