Jump to content

Recommended Posts

Posted

hello peeps.....long story short I finally got to test my new wheelie bar out that ive had for about 2 months now at my local track thanks to surfrjag, I might have spelled it wrong....but anyway  ive never ran a bar before so I had no idea what the bike was gonna do........again long story short I got the bike to run my best time at 6.991 at 90mph.....that's with a stock frame stock wheelbase, 421 cub, drag ported as I was told  but I have no idea, 50/50 race gas and pump.  I was wondering is that a good or decent time for that setup for the ones that have a similar setup...?? oh yeah 35mm airstrikers, forgot to mention those...and 18/38 for the sprockets...thanks

Posted

A 1.4 60 foot is good. And those are good numbers for a 421 cub not on alky or no NOS. My 535 best to date with my fat ass is 6.71 at 101mph.

 

Sent from my Samsung Galaxy note 3

Posted

Your boy is an idiot lol, 1.4 is a respectable hard number to acheive if that is the case something is off tuning or gearing wise clutch wise you should have ran alot faster with that 60ft , u have an overide?

Posted

A 1.4 60 foot is good. And those are good numbers for a 421 cub not on alky or no NOS. My 535 best to date with my fat ass is 6.71 at 101mph. Sent from my Samsung Galaxy note 3

Oh ok, would be nice to hit that mph....i top out at 90 91 every race....good to know that i ran good numbers......ive read alot about running alcohol but dont really wanna mess with the purging...lol...i know thats lazy....plus im pretty satisfied from what ive been hearing....and yes i have an override

Posted

Your boy is an idiot lol, 1.4 is a respectable hard number to acheive if that is the case something is off tuning or gearing wise clutch wise you should have ran alot faster with that 60ft , u have an overide?

Well i do run out of gear the last 100 feet or so...it be screaming for more but its not there....what i was told was that 38 rear is the smallest i can. Go and a 19 in the front would prolly be to much, so im basically stuck....but to invest in some taller tires to get more topend

Posted

I run a 18/39 and top speed is 101 but I just put on a 37 last week. If u have a Honda hub you can go alot smaller then a 38.

 

Sent from my Samsung Galaxy note 3

Posted

I don't think your running out of gear with 18/38,that gearing is gd for 100+ in the 1/8.Something else is going on with your motor setup. A 19 sprocket would be a lot for 421 cub on gas..

Posted

Your boy is an idiot lol, 1.4 is a respectable hard number to acheive if that is the case something is off tuning or gearing wise clutch wise you should have ran alot faster with that 60ft , u have an overide?

Well i do run out of gear the last 100 feet or so...

Nice times, got a pic of your quad?

Yesi do..... ill try to post it

Posted

What rear tires (size) ?

Believeim running 18 inch hoosiers.....and what does the honda hub gotta do with the sprocket?.. guess i need to do some more reading..and for cce12 i dont have a 6th gear if thats what youre thinking

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...