Camber Help

[tkiss1]

That's normally what I do on any other forum but for some reason this forum it doesn't do anything when I paste

[tkiss1]

[tkiss1]

In this pic you can see how the top of the right spindle sits lower then the left when you compare it to the bottom of the shocks

 

[dave5.0]

You've got different backspaces wheels on the front of that thing. Alot more brake caliper sticking out onnthe right. Wheel bent or something too?

[tkiss1]

Yes two different wheels , one is stock and one itp, but the back spacing wouldn't affect the camber.

[dave5.0]

What's it do when you compress it to ride height?

[dave5.0]

Just ride it till it melts down. Then sell it. Won't matter if the cambers off a bit sitting in the garage with the motor in a molten mess.

[trickedcarbine]

wonder if upper a-arm has a bent ball joint tab?

That's what it looked like to me.

 

Also, if those are at 14.5" it wouldn't cause any issues like what's going on

[tkiss1]

The spindle is what actually look bent from looking at it closer , I'm going to change that out and see.

 

 

And I can only paste links on the phone also . Sucks

[SAVAGE420]

How did you post the link? This junk forum wont let me post links in the reply unless im using my phone

Use photobucket 

[m671054]

Put suspension related topics in the suspension section. just a thought.

[tkiss1]

If you use photo bucket you still have to copy and paste the IMG code from the pic which is what we can't do on the desktop, on this forum only, I'm apart of many other forums where I use photobucket and the IMG code pasted into the post and it works fine. On this forum I could only paste via phone.