tkiss1

Got one

I only need the front fender uncut in good condition , yeah I'm not sure what's shipping like but I guess when young gun racing gets a quote I'll find out

Great thank you

Like the title says I'm looking to buy the stock intake cross over tube so I can get rid of my boost bottle. Let me know how much shilled to 11779

Hey guys, Im looking for a front fender that has not been cut and is in pretty good condition. Please let me know what you have and how much shipped to 11779 Thank you

Yeah I figured that . If you don't mind finding out a price that be greatly appreciated!

How much for Grab bar, airbox lid and front bumper shipped to 11779

How much for the rear plastics shipped to ny 11779

It seems like the little oil I put on the slides have helped for now. Rode it around a little yesterday and It wasn't getting stuck. Thanks everyone for their help!

If you use photo bucket you still have to copy and paste the IMG code from the pic which is what we can't do on the desktop, on this forum only, I'm apart of many other forums where I use photobucket and the IMG code pasted into the post and it works fine. On this forum I could only paste via phone.

The spindle is what actually look bent from looking at it closer , I'm going to change that out and see. And I can only paste links on the phone also . Sucks

from my understanding if they are out of sync the slide should still not get stuck. Im sure I don't have a 100% accurate sync but I think that would just affect performance almost like fine tuning it. Both slides are at the same height and move togeather when off as I stated earlier. Once bike is running the choke side seems to stick, almost as if the vacuum created from the intake is pulling it in and holding it there. I oiled it up yesterday but it was to late to run it longer but seemed okay. its 13 degrees out now so im not even going to mess with it today.

Dave 5.0- yes that's exactly correct which is weird to me.. Yes the slides should be in the correct locations, they have the divit for the window on the carb which is visible. I'm gonna take apart the carb and make sure the hole is not covered

Well I did the carb sync by eye but the issue is one slider is getting slightly stuck while running only though

Yes the carb is in sync while off. Once running it gets out of sync and the left side carb sticks low end