jayhawkatv Posted October 23, 2013 Report Share Posted October 23, 2013 Just a few Questions for some of you guys. Found a brand new 4 mil dm topend complete minus domes new in the box for 2 grand. Is that a reasonable price? Ive never priced them. 2nd ? is how much case work Is required on the 4 mil dm setups? or are they just bolt on? How comparable do these run against a 10 mil cub? If I buy I will obviously send to get ported and custom cut domes for alky. 1 more question. What size carbs, Pipes? and how much more money can I expect to dump into this after bulding the topend? If there is anything else I need to know feel free to share as I'm trying to learn here. Thanks for the help. Kyle Quote Link to comment Share on other sites More sharing options...
locogato11283 Posted October 23, 2013 Report Share Posted October 23, 2013 Are you talking about the one on FB? If so, I'd pass on that one. Go with a reputable builder and be done with it. I really liked my 10mm Cub from Redline. I know the 4DM are runners too. I think you'll have more money in the DM than the Cub. Quote Link to comment Share on other sites More sharing options...
jayhawkatv Posted October 23, 2013 Author Report Share Posted October 23, 2013 yep im talking about that one. Its not ported so I would send it to get ported and domes cut for it by a reputable builder. Just didn't know if The dm was as good a bang for the buck as the cub is. Quote Link to comment Share on other sites More sharing options...
Redline Racing Posted October 23, 2013 Report Share Posted October 23, 2013 A new DM top end is 2900. Ported and plated cyl Head and custom domes V force and billet intakes Flanges Studs and all hard ware. Pistons. Porting 350 Domes 125 Plating 200 You might save 225.00 at most. Quote Link to comment Share on other sites More sharing options...
jayhawkatv Posted October 23, 2013 Author Report Share Posted October 23, 2013 thanks cam Quote Link to comment Share on other sites More sharing options...
phunt Posted October 24, 2013 Report Share Posted October 24, 2013 There is a 4mill dm 78mm ran a 3.55 1.30 60ft 85.5 mph this pass Fri night at home track, tim at Titan racing did the motor. Bike weight 245lbs rider 105lbs Quote Link to comment Share on other sites More sharing options...
J-Madd Posted October 24, 2013 Report Share Posted October 24, 2013 That's pretty impressive. Quote Link to comment Share on other sites More sharing options...
phunt Posted October 24, 2013 Report Share Posted October 24, 2013 I got him playing around with his clutch setup, it was running 70s then when into the clutch. Two weeks ago he went a .62 and .63 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.