how to get better low end power

[camatv]

that is fucking bad ass.  i dont care what you say!!

 

 

as to the original question.

 

banshee's cannot make tq  bullshit!  REAL tq porting, tq domes ( not 17cc shelf dome phh) good tune, they will make 50-55ft lbs of tq  thats more than that retarded yfz. PLUS they will be more reliable, and still have lots of top end.   cc increases help also.  most issues I have personally seen were from imporper porting.  to me  tq or trail porting takes LONGER to do than a "drag" port.  the work in the transfer area takes for ever  fmf pipes will make as much if not more tq than retarded pt mids will.  ( with porting)   BUT  in my opinion the best tq pipe is the t-6

[camatv]

where was that diesel for sale at?

[camatv]

SWEET  now thats a pit cruiser..

 

http://www.frequency.com/video/halls-custom-conversions-with-cummins/98142813

[sprinklerman]

that is fucking bad ass.  i dont care what you say!!

 

 

as to the original question.

 

banshee's cannot make tq  bullshit!  REAL tq porting, tq domes ( not 17cc shelf dome phh) good tune, they will make 50-55ft lbs of tq  thats more than that retarded yfz. PLUS they will be more reliable, and still have lots of top end.   cc increases help also.  most issues I have personally seen were from imporper porting.  to me  tq or trail porting takes LONGER to do than a "drag" port.  the work in the transfer area takes for ever  fmf pipes will make as much if not more tq than retarded pt mids will.  ( with porting)   BUT  in my opinion the best tq pipe is the t-6

Have to agree with Cam here. ^^^  Whatever he did with the lil 350 he brought to the HQ ride must have worked,because he was giving the duner bikes a 50yd headstart and still stanky-legging them at the end of the strip...and Cams no lightweight. Itll take LOTS of TQ to move his big 'ol butt around like that.

[Finch]

where was that diesel for sale at?

northern Utah

[trickedcarbine]

that is fucking bad ass. i dont care what you say!!

 

 

as to the original question.

 

banshee's cannot make tq bullshit! REAL tq porting, tq domes ( not 17cc shelf dome phh) good tune, they will make 50-55ft lbs of tq thats more than that retarded yfz.

This dome situation you speak of.... Care to elaborate? I'm just assuming you are referring to the blaster piston angle dome with a wider squish band. Not sure if that's the same idea you are hinting or not

[Brap_Life]

run a bead of weld on the top of the exhaust port, will lose some rev and top end hp though.

[AKheathen]

what i want to do is take a 7-10mill serval and chop the bottom to 4mill, then grunt port.... yeyah

[trickedcarbine]

what i want to do is take a 7-10mill serval and chop the bottom to 4mill, then grunt port.... yeyah

I was gonna have a builder do that with a 7mm DM cylinder. Sort of like a super duper bore serval.... But after talking with the builders, it seems that with the right porting/domes and parts combo that the new CP cylinders are really capable of impressive bottom end if you just pony up the dollars to do it right once. I've got some re assuring info that machining a Gimp cylinder is far more work and cost then just doing a proper set up larger stroke motor.

[Coupelx]

run a bead of weld on the top of the exhaust port, will lose some rev and top end hp though.

Bitch, Are you retarded?

[Glenyboy]

I've heard Viagra can give you some low down power

[Finch]

http://www.ksl.com/index.php?nid=218&ad=27112546&cat=&lpid=3&search=banshee&ad_cid=11

[Deadbeat]

WANT