eadams450 Posted August 27, 2013 Report Posted August 27, 2013 Im new to the banshee world but not to the dunes or 4wheelers. I have a banshee frame and a +6 swinger. My plan is to only ride it in the dunes little sahara and st anthonys. Im hoping for a 100hp motor I was wondering what everyone thinks would be best. Right now i have nothing besides the frame, so its kind of a blank slate. Thanks for any help. Quote
eadams450 Posted August 27, 2013 Author Report Posted August 27, 2013 budget not really sure. will be a lot more once im done with school. and i dont plan on being in a hurry with any of it. but idk for the motor id say 2500? not really sure though. Theres a +4mill from east coast atv on ebay but not sure if thats would come close to producing the power I want Quote
okbeast Posted August 27, 2013 Report Posted August 27, 2013 Just building the motor isn't all of the cost. You have to add in carbs/pipes/clutch upgrade/etc. in. Quote
Surfrjag Posted August 27, 2013 Report Posted August 27, 2013 100hp just to dune ride? shoot high I guess but I don't believe you need all that to dune ride... just sayin Quote
eadams450 Posted August 28, 2013 Author Report Posted August 28, 2013 I know that im going to need all the other stuff, i was think like +4mm crank with 68mm bore and a good dune port. I was going to go with 35mm PWKs and Sniper inframes. Quote
okbeast Posted August 28, 2013 Report Posted August 28, 2013 A 4mil cub will be pretty peaky trying to dune, not unrideable but not ideal. A 4mil serval might be just what you need. 80-90HP on pump gas and a little more bottom end. 1 Quote
sprinklerman Posted August 28, 2013 Report Posted August 28, 2013 I know that im going to need all the other stuff, i was think like +4mm crank with 68mm bore and a good dune port. I was going to go with 35mm PWKs and Sniper inframes. You can dune a 4mm,,and its fun, don't get me wrong. But when you dune a 10mm, you'll throw rocks at the 4mm. Quote
eadams450 Posted August 28, 2013 Author Report Posted August 28, 2013 whats wrong with the snipers? Quote
FullThrottle_06' Posted August 29, 2013 Report Posted August 29, 2013 This isn't a fucking pipe debate. Stay on topic. Zilla is clearly a shearer nut swinger. Ignore his pointless remarks. Quote
eadams450 Posted August 29, 2013 Author Report Posted August 29, 2013 alright so what builders does everyone recommend for a motor then? Quote
m671054 Posted August 29, 2013 Report Posted August 29, 2013 2500 wont get you anywhere at a buildet when you said you only have a frame and swing arm. be real with yourself or this wil never happen. you need to buy a complete engine here or ebay. plan on spending 2-3 times that to build a nice one. avg cost for a drag build is 5-7k starting from nothing and doing as much yourself as possible Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.