Klotz Posted November 3, 2003 Report Posted November 3, 2003 Please guys i really need your help on this.....i have pro circuits and love the top end...i just want a pipe with more low end but with the same top end or if posible more....should i sell the pcs and if i do what do i buy..please help....wpuld it help if you knew the riding i did!! thanks Quote
bignasty1 Posted November 3, 2003 Report Posted November 3, 2003 have you thought about getting a cool head that would be the next logical step for gaining more power every where in you power band. i recomend a noos machine cool head i have one i love it great quaility looks and most of all performance. well worth the cash. Quote
Banchetta Posted November 3, 2003 Report Posted November 3, 2003 I agree, get a cool head and boost your compression, that'll help w/ the low end power your craving. If thats still not enough, then get a different set of pipes. You'll lose the high rev, but gain a lot of low end and midrange. You'll have more torque and be able to pull a higher gear to make up the top speed....Depends on your type of riding also. Whats the terrain you mostly ride on?? Quote
Klotz Posted November 3, 2003 Author Report Posted November 3, 2003 i like to race ppl and also ride a lot in the pits climbing big hills...and lately i have thoguht aslot obout cool heads...to get them should you put in new pistons right away or do they bolt on and the nos heads....are they just for nos or like recreational riding too....could you give me a site where i could look at these..thanks agian Quote
BansheeBrian Posted November 3, 2003 Report Posted November 3, 2003 The pipes you have are fine. I own PC's and thought the same thing your thinking," where's the low end on these pipes!!". That all changed when i got a Noss head. Quote
. Posted November 3, 2003 Report Posted November 3, 2003 www.nossmachine.com He's the guy that makes the heads, not for nos. Just like a pro design cool head but the look is a lot cleaner, uses the same domes, and he's a part of this forum to boot. His ad is at the top of the page when it goes through the ads. Quote
Banchetta Posted November 3, 2003 Report Posted November 3, 2003 i like to race ppl and also ride a lot in the pits climbing big hills...and lately i have thoguht aslot obout cool heads...to get them should you put in new pistons right away or do they bolt on and the nos heads....are they just for nos or like recreational riding too....could you give me a site where i could look at these..thanks agian I do the same type of riding and perfer the midrange pipes hands down. Your call though.... Quote
dlnoss Posted November 4, 2003 Report Posted November 4, 2003 The head is inexpensive compared to a new set of pipes. Let me know if you are interested and I'll help with dome selection. I noticed that your timing is advanced. That, your elevation, and the type of fuel you want to run determine what compression you can go with. Increasing the compression will definitely improve your bottom end power. -David Quote
Klotz Posted November 4, 2003 Author Report Posted November 4, 2003 thanks for the help dave,...im looking into noss heads and then ill get back to you...should i buy them when i get a rebuild??or get them now...do they just bolt on..... thanks Quote
dlnoss Posted November 4, 2003 Report Posted November 4, 2003 It's a pretty easy mod. You only have to remove the fuel tank and drain the coolant to remove the stock head. You clean the top of the cylinders and install the new head. Re-jetting usually isn't needed but it's wise to check it after about any mod. Quote
ridingorhiding Posted November 4, 2003 Report Posted November 4, 2003 Trade FMF fatties for ur pc's Quote
Klotz Posted November 4, 2003 Author Report Posted November 4, 2003 hey thanks agian...i just ave one more question about the install.....i dont have to rebuild to i...i can leave the pistons that i have in there now...cause i wont be needing a rebuild for a while i have lots of compretion...... i think im going to keep my pc's////thanks for the offer thoguh shane Quote
dlnoss Posted November 4, 2003 Report Posted November 4, 2003 You don't need to rebuild the top end or replace the pistons to install an aftermarket head. If you stay with domes that provide a 'reasonable' compression increase, there are no problems using it on an internally stock engine. Quote
Klotz Posted November 5, 2003 Author Report Posted November 5, 2003 do you have an e-mail so when i buy these i can tlak to you about the domes and what i need to know?? thanks Quote
dlnoss Posted November 5, 2003 Report Posted November 5, 2003 Sure, I'll PM my email and phone number -David Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.