RACxEMxWILLIE Posted June 22, 2013 Report Posted June 22, 2013 Look at the red wire. I believe the flywheel was rubbing it. I think im gonna need a new one or does anyone have a remedy for this? Im open to suggestions Quote
mother trucker Posted June 22, 2013 Report Posted June 22, 2013 solder &shrink wrap this is a real answer Quote
sheerider1026 Posted June 22, 2013 Report Posted June 22, 2013 solder &shrink wrap THIS!!! ^^^^^^^^^ Quote
m671054 Posted June 22, 2013 Report Posted June 22, 2013 If no wire damage try liquid electrical tape. can get at carparts store usually. if wire damage solder and shrink as prev stated Quote
sheerider1026 Posted June 22, 2013 Report Posted June 22, 2013 If no wire damage try liquid electrical tape. can get at carparts store usually. if wire damage solder and shrink as prev stated NOT THIS!! ^^^^ Quote
m671054 Posted June 22, 2013 Report Posted June 22, 2013 Please explain how thats not a good fix. shit is like liquid rubber. it would reinsulate chaffed insulation just fine. Quote
sheerider1026 Posted June 22, 2013 Report Posted June 22, 2013 The wire has probably been rubbing the stator. I would cut, solder, heatshrink it.. Even if it has not rubbed tha t spot is still weak now... Why half ass it? But if you are not the guy stranded out in the middle of no where because you did a half ass repair, why would you care? Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.