n2otoofast4u Posted June 10, 2013 Report Share Posted June 10, 2013 Get it started and turn the fuel off. See if it cleans out as the level in the bowls drop. You said the one time you started in immediately after turning the fuel on and it was clean. Leads me to believe the floats are too high. Quote Link to comment Share on other sites More sharing options...
4mil89 Posted June 10, 2013 Author Report Share Posted June 10, 2013 Ok i will try that... Sent from my SAMSUNG-SGH-I717 using Tapatalk 2 Quote Link to comment Share on other sites More sharing options...
Larry's Shee Posted June 10, 2013 Report Share Posted June 10, 2013 Be prepared to stall the engine out if it starts to run away (auto-ignition) Quote Link to comment Share on other sites More sharing options...
4mil89 Posted June 11, 2013 Author Report Share Posted June 11, 2013 Deffinetly seems to rev cleaner as it ran out of fuel...float level was 21.50mm should be 19 i adjusted them to 18.6 roughly... i doubt thats going fix the issue but we will see. No other way to test the stator? Sent from my SAMSUNG-SGH-I717 using Tapatalk 2 Quote Link to comment Share on other sites More sharing options...
bansheedemon Posted June 11, 2013 Report Share Posted June 11, 2013 If the stator says ricky on it you should already know it is junk. Just wait for it to leave you stranded in the trails. Oem is the way to go. If your stator isnt bad now it will go bad, ricky stators are not known for being good. In fact they are known for quite the opposite. Quote Link to comment Share on other sites More sharing options...
4mil89 Posted June 19, 2013 Author Report Share Posted June 19, 2013 The needle jets must have fell out of each carb when i cleaned them...ordered new ones...weird Sent from my SAMSUNG-SGH-I717 using Tapatalk 2 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.