HJR 4MM cranks

[JoeStar85]

Kevin sells HotRods cranks, not rebuilt "Hotrods" cranks.  When I got mine from HJR last year it was shipped in the Original Box from hotrods.  Just specify that you want a hotrods crank because he also sells the cheaper cranks (as of last year).  Spend the extra money for a better quality crank.

[possum]

^^ what he said. I seen hotrods and wang in boxes. Hotrods and call it a day and dont look back.

[FASTOYS]

Hot Rods gets my vote! Ask Kevin and im sure he will tell you what he sells...

[thomas h.]

My hotrod 4 mill bent the rod. My HJR spec is 4 mill crank is running good.

 

When have webs of a crank ever fail.

 

Kevin will build what ever you want and do it faster and cheaper.

[trickedcarbine]

Faster, cheaper.........

 

A long time ago as a young lass,I learned in business you have 3 options.

Good, Fast, Cheap..... Pick two.

 

Now that phrase gets kicked around all the time here. It's for a reason.

[thomas h.]

Good = labor is top notch and only done by him.

Fast = he really work late every day to get it done

Cheap = lower overhead and he does high volume.

[04_blu_shee]

&That is the exact reason I put up the cash for a Hot Rods crank....Build it right now so you dont have the failure and cost you even more to do the repairnbsp;

 

Garbage !!!!!!The abuse and hours that I've seen hot rods withstand is unimaginable- just pony up now for the hot rods you'll be glad you did "You can go broke saving money" couldn't be more true, most guys find themselves digging deeper to fix what could have been prevented the first time around Sent from my iPhone using Tapatalk 2

 

[mopar1rules]

My vote is for a vitos 4mm long rod crank. Mine has been good so far. Only problem was keyway for water pump gear seemed to be off a little. Had to sand the key to make it fit the keyway. The rods are good tho.

[sheerider11]

 

My vote is for a vitos 4mm long rod crank. Mine has been good so far. Only problem was keyway for water pump gear seemed to be off a little. Had to sand the key to make it fit the keyway. The rods are good tho.

I run a Vitos crank. No problems yet.

[trickedcarbine]

 

Good = labor is top notch and only done by him. Fast = he really work late every day to get it doneCheap = lower overhead and he does high volume.

Hmmm

[thomas h.]

Good = labor is top notch and only done by him. Fast = he really work late every day to get it doneCheap = lower overhead and he does high volume.

Hmmm

 

I think he agrees with me.

 

[wacko2000]

My vote is for a vitos 4mm long rod crank. Mine has been good so far. Only problem was keyway for water pump gear seemed to be off a little. Had to sand the key to make it fit the keyway. The rods are good tho.

I run a Vitos crank. No problems yet.

 

"YET"

 

 

Sent from my iPhone using Tapatalk 2

[Colby]

Twister crankshaft ..

[mike0chek]

hot rods! my "wang" crank rod snapped and almost ripped motor in half.