JoeStar85

Engine parts are sold. Still have fenders

Blue Front and rear plastics with front fender stays-$175 plus shipping -Uncut OEM plastic, no cracks. Has slight discoloring like all the blue plastics get. Good shape. OEM crank, pistons, head, timing plate and reeds with cages-125 plus shipping -I removed the stock parts and upgraded to a 4mil crank. Parts are in excellent shape. I will email you pics if you are interested. Wouldn't allow me to upload photos.

I ordered a new chain and sprocket set. Went to replace the rear sprocket and it does not line up with the bolt pattern on the sprocket hub? Do I need to order a specific sprocket to fit the durablue sprocket hub? Either that or the hub I have is not for the banshee, I bought it used.

Did the tusk axle come with all new hubs? sprocket, rotor and wheel hubs? Mine have play in them but im not sure if it is the splines on the axle or the hubs that are worn.

Did you get your axle setup correctly?? I need a new axle and was looking at the adjustable tusk. Does it come with new wheel hubs, rotor and sprocket hubs?

I have play in both rear hubs the sprocket and rotor. I'm assuming it's time to replace the axle? I haven't looked very much at aftermarket axles. So far I am looking at the Dura Blue X-33 axle. I like that it can be adjusted to different lengths. I have a stock axle right now with offset wheels which makes the rear end a couple inches wider. I want to get different wheels in the future so it would be nice to be able to extend the axle instead of buying off set wheels. I am just going to replace the bearings in the stock carrier for now. What's your input on axle brands and which one is the best choice? I do mostly woods riding, no crazy jumping or anything.

I need to replace the carrier bearings, what brand makes a good replacement? I have the factory carrier.

Kevin sells HotRods cranks, not rebuilt "Hotrods" cranks. When I got mine from HJR last year it was shipped in the Original Box from hotrods. Just specify that you want a hotrods crank because he also sells the cheaper cranks (as of last year). Spend the extra money for a better quality crank.

If you decide to sell the grill seperate, let me know.

How do i know when there is too much play in the rear axle to ride? I was getting it ready to ride for this weekend at camp when i realized that their is some play in the rear axle. It's not wobbling all over the place but there is some movement in it. I can't get the bearings to be able to fix it before i leave for camp and i was hoping if i don't jump it or beat the snot out of it the whole time that I could get away with doing a little riding this weekend. If I grab the rear tires and turn them in opposite directions there is about 1/4" of play. and a slight bit of play when pulling up and down, back and fourth.

Haha.... I was thinking the same thing

I got a hardcore MX port and polish along with a bunch of other motor work done by Kevin. My bike runs awesome! Kevin's customer service is like none other and is always easy to get a hold of and willing to answer any questions I have. You will be happy with the quality of his work.

It's about a 2hr drive to marienville for me. Trail pass is only $35. I haven't been to willow creek yet. I also looked into a place by Pittsburgh called Mines and Meadows and they want $25 for a day or like $250 for a year! I want to get down there and check it out but I don't think I will be buying a year pass, that's expensive!

Im going to Thunder on the Hill in Cadiz OH this saturday for their poker run. Anyone else going?

Im about 20-30 minutes away from you. My buddies said there is a night ride September 1st in Meadville? Did you hear or know anything about that?