D.N.K Posted February 21, 2013 Report Posted February 21, 2013 The brake level is pointing up. Its like the bars are not long enough. Anyone have this problem? Also the clutch lever has a nut that hits off the kill switch, not allowing it to be pulled in all the way . Anyone got any suggestions? Has anyone else have this issue? thanks Quote
sheerider11 Posted February 21, 2013 Report Posted February 21, 2013 They say you really can't run the ASV with the light switch. Quote
trickedcarbine Posted February 21, 2013 Report Posted February 21, 2013 I run mine on the bars with the accessory switch and a tether..... Quote
Sandking Posted February 21, 2013 Report Posted February 21, 2013 Works on mine with light switch Quote
5150banshee Posted February 21, 2013 Report Posted February 21, 2013 The bend on the bars is not long enough had the same problem untill I switched my bars to the renthal 1 1/8 fat bars they have a longer bar. As far as the clutch I had to swap the light switch or u can also cut the Allen down and not run the bigger nut. I recently swapped to a shorty that doesn't have the adjustable nut so I can run it like factory. Sent using Tapatalk Quote
sheerider11 Posted February 21, 2013 Report Posted February 21, 2013 When I called ASV the guy asked if I had anything on the bars. He said just run the levers and throttle. I have the tether on the inside. Quote
Nieskes Posted February 21, 2013 Report Posted February 21, 2013 But the switch on the other side of the lever. Quote
Glenyboy Posted February 21, 2013 Report Posted February 21, 2013 Are they stock bars? Mx bars arent as long as atv bars maybe you have a set of those? Quote
ticktock Posted February 22, 2013 Report Posted February 22, 2013 Just move the acc. switch on te other side of the clutch perch Quote
D.N.K Posted February 22, 2013 Author Report Posted February 22, 2013 The bar is not long enough to move the switch to the other side of the lever. The bar slopes down before this point. I think my just going to have to take the nut off, cut the allen, and maybe put a smaller nut on the opposite side of the lever. Sort of what "5150banshee" suggested. Also I may look into getting longer bars, although I'm not sure what bars to get. Thanks for all the replys Quote
D.N.K Posted February 22, 2013 Author Report Posted February 22, 2013 Works on mine with light switch does yours have the nut that im talking about? or are you running the shorty? or the even more expensive one with the dial adjuster? Quote
ticktock Posted February 22, 2013 Report Posted February 22, 2013 I have aftermarket bars and it fits great with the lever and the acc switch switched around Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.