thekevin Posted December 14, 2012 Report Posted December 14, 2012 I have had a few 2 strokes but this is my first Banshee. It's a 98 and this is what I was told about it when I bought it. 4 mill stroked 80 over, Vforce reeds and reed cages, Toomey T5 exhaust, Hinson clutch. I got it home and took all the stickers off and gave it a good cleaning. It was lowered 3 inches and widened 4 when I got it. Right now I have it back at stock height because of the trails I ride. I have an appt this week to get the carbs torn down and cleaned and resync'd back on the bike. Please be patient with me as I am sure I will have plenty of stupid questions. Before this I owned 3 Raptors, 2x 660's and a 700, but wanted to give a Banshee a try. Here it is when I brought it home. And here it is after about an hours worth of cleaning and de-stickering and raised the rear back up to stock. Quote
CAJUN BANSHEE Posted December 14, 2012 Report Posted December 14, 2012 Welcome! Nice set of wheels ya got der. Quote
5150banshee Posted December 14, 2012 Report Posted December 14, 2012 Welcome to the site and ur new addiction. Sent using Tapatalk Quote
MarineNYC Posted December 14, 2012 Report Posted December 14, 2012 Welcome. Do the carbs yourself. Its easy Quote
MarineNYC Posted December 14, 2012 Report Posted December 14, 2012 Here is a video on how to synch them. Quote
thekevin Posted December 14, 2012 Author Report Posted December 14, 2012 I don't know about easy. This thing sat for 3 months before I got it and the was a lot of wetness around the carbs so I figured having them completely went through couldn't hurt. Its also smoking quote a bit more out of one side. Sent from my Galaxy Nexus using Tapatalk 2 Quote
bluebanshee98 Posted December 14, 2012 Report Posted December 14, 2012 welcome and enjoy the forum. while you are tearing the carbs apart make sure it has the right jetting. Quote
MarineNYC Posted December 14, 2012 Report Posted December 14, 2012 It is easy. Can u put air in the tires or change the oil? If you know how to use a screwdriver you can get the carbs apart. You should learn how to work on your own shit Quote
Nieskes Posted December 14, 2012 Report Posted December 14, 2012 Welcome! Clean the carbs yourself, no need to pay someone to do it for you. Quote
troyzstang Posted December 14, 2012 Report Posted December 14, 2012 Welcome to BansheeHQ Nice looking bike. As I'm sure you already know , Banshee's and Raptors are night & day different. I enjoy my 700r in the trails and Playing around with the wife & boys. Then I have the Shee when I want to "run with the big dogs" Once again Welcome Troy Quote
Nightmare Posted December 14, 2012 Report Posted December 14, 2012 Hola Sent from my SGH-T679 using Tapatalk 2 Quote
thekevin Posted December 14, 2012 Author Report Posted December 14, 2012 Yeah, my raptor 700 had FMF exhaust and a power commander but this banshee would destroy it. I guess I am going to take a shot at the carbs, I am fairly mechanical but intimidated by the dual carb setup and getting them to sync. Sent from my Galaxy Nexus using Tapatalk 2 Quote
bluebanshee98 Posted December 14, 2012 Report Posted December 14, 2012 There is videos on carb sync how to on youtube. Do one carb at a time! Quote
dune goon Posted December 17, 2012 Report Posted December 17, 2012 good looking bike amazing how just a little soap and water can make a bike look. good luck! Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.