banshee15 Posted May 1, 2012 Report Posted May 1, 2012 i bought bike i had new seals an in it what size jet would be fine i bealve i have a 310? an size of piolt jet? the bike is board to 40 over? he said the exchaust was tommey 3s everything else should be stock Quote
Finch Posted May 1, 2012 Report Posted May 1, 2012 spell check? need to know elevation and temp too Quote
banshee15 Posted May 2, 2012 Author Report Posted May 2, 2012 (edited) spell check? need to know elevation and temp too i live in central illinois i think it 310 305 or 315 in it an it acts like it running way to rich also wat size pilots jets? or is stock ok Edited May 2, 2012 by banshee15 Quote
Finch Posted May 3, 2012 Report Posted May 3, 2012 Stock should be fine how can we help ya you dont even know what jets are in it and they go up by 10s so no 305 or 315 if ya think its rich go down a size smaller and see what happens what position is your needle at ? Quote
03DMshee Posted May 3, 2012 Report Posted May 3, 2012 Gonna have to give a lot more info than that...there is an informative thread all about jetting in the jetting area Quote
slothman Posted May 3, 2012 Report Posted May 3, 2012 nobody knows or what? You can't just "guess" the pilot size. Remove the carbs and look at the jets for yourself. Every bike is going to require different jets, depending on your elevation and what mods are done to the bike. What air intake setup are you using? Any other mods besides the exhaust? What is your elevation? What color are the electrodes on your plugs? Help us answer these questions, and we will help YOU Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.