392cc Athena kit.

[Banshee392]

ya and i know fmf pipes dont like to rev past 10K

 

 

Never seen the rpm but it fly and I've never had a problem with my fmf fatty gold series I was told the t5s would more suitable for my application but haven't gone that way set

[sheerider11]

My motor revs to 16500.

Never mind that's my street bike.

[vulvafan537240]

Frist of all i was stating that i Haven't had any problems with the athena heads I'm running a 4 mill pc crank with a 2 mill Athena 392 big bore kit +5 time 28 mm carbs 30 pilot (yes) ass hole a 420 main fourth clip on needle v3 fmf fattys deleted air box k/n filter 15/41 gear 21/10/9 tires 28/1 and it more like a 430

 

 

And hell my friends bike is stock bore cool head 22cc dome v3 27.5 pilot 270 main and t5's15/41 and hie does 90+ ya shit slow don't be mad fuck you troll

 

do you make alot of craigslist ads for banshees?

[sheerider11]

do you make alot of craigslist ads for banshees?

Kind of like this guy,

 

I have a clean 04" Banshee (dura blue) never raced or beaten on. Adult owned & maintained. Oil & spark plugs Changed every 3 rides along with power wash. Full fmf gold series exhaust, boost bottle, cool heads, nerfs, k&N air filter, pro taper bars, bike needs nothing and its faaast!!!! Selling/ trading for a (450) I'm tired of kick starting and mixing gas riders knw what I mean..I will also entertain trades for a (quadzilla) as well but bike must be in same running condition as my bike. No need wrk bikes qualify...if serious & interested give me a text or call @ (732) 801-4288 thanx for looking.

 

I worked on this guy's bike a lot, he's stupid. I've been offering 1000 bucks for the past 2 months.

[zach45]

My PT mids rev to 15,115 rpm @ 109 mph. That was clocked aon the 300' busco dirt drag last weekend. Zach was there, he can vouch.

true story... Camera was broken at the time but I was there, everyone else we sleeping at the time

 

 

Sent from my iPhone using Tapatalk

[Zillaguy]

NO way it went 112mph! Not possible mechanically... My LT500R (Quadzilla) that is a 650cc DR.Q "Roidzilla" motor, with a DR.Q pipe will go 112 but not a mildly built at best Banshee... My new project, 94 Banshee with an 84 Yamaha RD500 V-4 (4cyl 2 stroke) motor will rip about 150 in a straight line with the right tuning... Got the idea from Robert (DR.Q) he built a Zilla with a Suzuki Gamma 500 4cyl 2-stroke motor... Go to youtube and listen to that bike!

[trickedcarbine]

This had to be another fucking troll thread! There have been so many lately. I love seeing people get "racing PYPES, big bore heads, stuffer reeds, port polished head, etc."

 

Rz500 would be bitchin!

It would pull some fucking gear! I can honestly say that I have been up to almost 120mph on a RZ with a motor built by Spec II. I think that was the name.... And some hand coned pipes from some company called Highway Man Pipes.

[HolySheet]

This thread is from June 2012.

[Zillaguy]

It will be bitchin!! The rd500 motor i'm using is .050 over race ported and polished, has had the power valves massaged, and has a set of hand coned pipes custom made by Eric Cook from PFR racing. The motor dynoed 130hp @ 11,600 RPM and 83lb/ft of torque@ 9300rpm.. I had to take my Banshee chassis jig it up, cut it to pieces and make new front down tubes and make the entire engine cradle from scratch... The lower frame rails are now 2.5 inches lower than a stock Banshee chassis to make room for the height of the rd 4cyl... I'm running a +6 swinger w/ a wheelie bar, single a-arm conversion... This is going to be a badass drag bike when done.. I'm setting it up for ashphalt, to run 1/4mile at Milan dragway in Milan,Mi. this summer. Hoping the bike runs low 9's.

[trickedcarbine]

Let me know when you make it up here to Michigan. If love to check it out.

[Zillaguy]

I'm in Michigan....I live in Westland, but am from Romeo/Rochester area.