spalding Posted September 30, 2011 Report Posted September 30, 2011 hey i have a set of pro circuit pipes and was wondering if i could shine them up using steel wool 000 and if not what to use Quote
volcrano Posted September 30, 2011 Report Posted September 30, 2011 sure can.i use s.o.s. pads.the soap helps.dont be afraid to give it some ass power when scrubbing.u wont hurt em.then get some good metal polish like blue magic,prism polish or comparable.if u got a buffer u can make em look new.if not by hand works well to but not like a buffer. Quote
jbooker82 Posted September 30, 2011 Report Posted September 30, 2011 SOS pads may be ok on crappy rusty pipes but I wouldnt use them on good chrome. You will scratch and put swirls in the chrome. Quote
crash&burn Posted September 30, 2011 Report Posted September 30, 2011 i've used sos pads for years on chrome new and old works well. I was taught to go back and forth with the sos pads not in circles or you will leave the swirls and then a quick hand polish always helps after being done. Quote
jbooker82 Posted September 30, 2011 Report Posted September 30, 2011 I would start out with 0000 steel wool. When your done polishing wipe them down with Acetone. It will remove left over polish and finger prints for a grease free shine. Quote
BigRed350x Posted September 30, 2011 Report Posted September 30, 2011 I prefer a 3hp grinder with a rough stone or stainless steel wire-wheel. LOL! Yeah, don't do that.... I found some no-scratch SOS pads at Walmart and use them on nasty pipes. Seems to work ok. Quote
volcrano Posted October 1, 2011 Report Posted October 1, 2011 ive done tons of pipes.they look new when im done.thats the way i do it.if u dont polish them after why use any steel wool on em?if u gotta use any abrasive wool,ur shit aint nice chrome anyway.too bad i didnt have good before pics,the set of trinitys i got were beat and now look new using sos and buffer method. Quote
jbooker82 Posted October 1, 2011 Report Posted October 1, 2011 I guess to me cleaning pipes is just that. A general cleaining, not restoring old rusted chrome. If the pipes are not junk rusted chrome I wouldnt use any steel wool. Steel wool isnt going to touch these. Or at least not until they are junk. Quote
slipknot23 Posted October 2, 2011 Report Posted October 2, 2011 I did my pro circuit pipes with wd40 and 0000 steel wool looks good to me Quote
ellison445 Posted October 2, 2011 Report Posted October 2, 2011 I use SOS pads on all the exhaust i have cleaned up, even on my cpi ....not one scratch or swirl and I been using them to cleans for years!!_ Quote
spalding Posted October 2, 2011 Author Report Posted October 2, 2011 hey slipnot did you spray them then spread it and rub it with the steel wool and does it have to be grade 0000 or can it be 000 just wondering your method looks good though Quote
slipknot23 Posted October 3, 2011 Report Posted October 3, 2011 spray them then spread it and rub it with the steel wool I used grade 0000 and 000 Quote
spalding Posted October 3, 2011 Author Report Posted October 3, 2011 for the silencers can you do the same i would assume so just wondering Quote
slipknot23 Posted October 3, 2011 Report Posted October 3, 2011 For the silencers i used mothers Mag & Aluminum Polish Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.