Read my plugs please!

[mk2dubbin]

my banshee has been a little hard to start lately so i pulled the plugs today before going riding tomorrow. this is what i found. i am assuming this is just an accumulation of unburnt oil? i cleaned the plugs and it fired up in 4 kicks or so again, and then fired up on the first kick after shutting it off. seems to have been my issue, but let me know what you guys think.

 

40:1 Klotz supertechniplate

93 octane from Shell

plugs probably have about 30 hours on them

roughly 1,000ft elevation

stock engine

fmf fatty's with fresh repacked silencers

fresh rebuild on carbs

280 mains on middle clip

27.5 pilots and about 0.5 turns out on the air screws

prodesign foam filter with cut airbox lid

 

[Zwiser]

ummm, those look horrible, id say your extremely rich bring your mains down to a 260, ans 25 pilots

[Zwiser]

ummm, those look horrible, id say your extremely rich bring your mains down to a 260, ans 25 pilots

[shakar]

those are spot on perfect.!! thats what mine looks like after a few min of riding hard........ way to go

[Larry's Shee]

Shit can't be that far off if you got 30 hours on a set of plugs

[Tedder]

I've never seen Klotz leave deposits like that.

Mods list says @ 40:1 - Must be 40 parts oil to 1 part gas

[SuperMex]

Can you please scrape away some of that gunk so we can try and read those plugs for you....Hahahahaa

[06specialedition]

[Boone]

Damn Dude..

[volcrano]

What kind of shitty plug is that??put a b8es in there and check them after those color.u might be using wrong heat range plug.b8es ngk ftw.