steeler2169 Posted April 26, 2011 Report Share Posted April 26, 2011 I just finished new top end and got done with break in by the book. Started to install +4 timing couldn't get nut loose with strap wrench and ratchet so I decided to repack silencers. I got done with that and wanted to start it to hear and it wouldn't start. I did turn the fly wheel backwards once would that hurt anything? I pulled the plugs after kick for ever and there is raw fuel on them. What could it be? Quote Link to comment Share on other sites More sharing options...
thrill-billy85 Posted April 26, 2011 Report Share Posted April 26, 2011 check your pick-up gap. also check all the connectors by the cdi. you may have loosened a ground or knocked something loose.......... check to see if youre getting a spark Quote Link to comment Share on other sites More sharing options...
steeler2169 Posted April 26, 2011 Author Report Share Posted April 26, 2011 I didnt even get that far I coulnt get the flywheel nut loose. I didn't mess with anything, but I do believe it isn't getting spark, but why Quote Link to comment Share on other sites More sharing options...
volcrano Posted April 26, 2011 Report Share Posted April 26, 2011 well check for spark first,then go from there.verify no spark.disconnect tors brain,over left pipe under frame and check fopr spark again,if none present earlier. Quote Link to comment Share on other sites More sharing options...
steeler2169 Posted April 26, 2011 Author Report Share Posted April 26, 2011 just pulled plugs and kicked no spark. Quote Link to comment Share on other sites More sharing options...
Larry's Shee Posted April 26, 2011 Report Share Posted April 26, 2011 check pick up coil, might have bumped it with strap wrench when trying to loosten nut. Quote Link to comment Share on other sites More sharing options...
steeler2169 Posted April 26, 2011 Author Report Share Posted April 26, 2011 I found what it was, this needs to go under the I F**k this up section. I used a screw driver along with the strap and the screw driver poked a nice size gash in the stator.Yeehaa Quote Link to comment Share on other sites More sharing options...
jerzy609 Posted April 26, 2011 Report Share Posted April 26, 2011 that sucks Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.