LEshee04 Posted April 8, 2011 Report Share Posted April 8, 2011 So i got a sweet deal fmf fatty gold series with power core 2 silencers. The guy i bought them from said he ran stock jetting with no problems. I have jus the pipes, stock carbs, stock foam filter with outerwear stock box with lid and snorkel. Elevation roughly 1200 above, temps about 40-80. From what i have gathered i feel a good starting point is 27.5 pilots and 290 mains. I kno someone will say search and i have i didnt find anyone with my elevation and as stock as I am! Well thanks guys in advance Quote Link to comment Share on other sites More sharing options...
LEshee04 Posted April 8, 2011 Author Report Share Posted April 8, 2011 Oh forgot i ran it for awhile ran great then after i parked it now it dont. It idles ok but thats all dont take throttle unless u give quick braps to build rpm then it will rev smooth. Sorry im a compleye newb to jetting guys and im lost Quote Link to comment Share on other sites More sharing options...
tgriffin27 Posted April 8, 2011 Report Share Posted April 8, 2011 Oh forgot i ran it for awhile ran great then after i parked it now it dont. It idles ok but thats all dont take throttle unless u give quick braps to build rpm then it will rev smooth. Sorry im a compleye newb to jetting guys and im lost Sounds like you need to clean the carbs and use fresh gas. I always use sta-bil in my gas also. How long has it been sitting and are you running the old gas from when you parked it? Quote Link to comment Share on other sites More sharing options...
Larry's Shee Posted April 8, 2011 Report Share Posted April 8, 2011 So did you run it with stock jets? How long? X-2 on carb clean and fuel. Other than unported 4mil and lower elevation I'm starting in 300-320 range with same pipes when I put them on. Quote Link to comment Share on other sites More sharing options...
bansheesandrider Posted April 8, 2011 Report Share Posted April 8, 2011 So i got a sweet deal fmf fatty gold series with power core 2 silencers. The guy i bought them from said he ran stock jetting with no problems. I have jus the pipes, stock carbs, stock foam filter with outerwear stock box with lid and snorkel. Elevation roughly 1200 above, temps about 40-80. From what i have gathered i feel a good starting point is 27.5 pilots and 290 mains. I kno someone will say search and i have i didnt find anyone with my elevation and as stock as I am! Well thanks guys in advance We ride at sea level and my wife's bike runs Fattys, Toomey 2:1 K&N filter with a 27.5 pilot and 300 mains, her old bike with the same setup ran 290 mains and 27.5 pilot. Quote Link to comment Share on other sites More sharing options...
LEshee04 Posted April 8, 2011 Author Report Share Posted April 8, 2011 Sounds like you need to clean the carbs and use fresh gas. I always use sta-bil in my gas also. How long has it been sitting and are you running the old gas from when you parked it? It has not been sitting at all fresh 93 octane fuel, 32-1 yamalube mix Quote Link to comment Share on other sites More sharing options...
LEshee04 Posted April 8, 2011 Author Report Share Posted April 8, 2011 (edited) So did you run it with stock jets? How long? X-2 on carb clean and fuel. Other than unported 4mil and lower elevation I'm starting in 300-320 range with same pipes when I put them on. Larry i ran for 15 minutes maybe with stock jets it seemed great, had power low mid and high good powerband too I will clean carbs carb this wknd, do the jets seem good to start with what i said.. Edited April 8, 2011 by LEshee04 Quote Link to comment Share on other sites More sharing options...
sleeper06 Posted April 8, 2011 Report Share Posted April 8, 2011 fattys with lid no porting no snorkel 240 main stock pilot,1turn out on the screw,needles all the way rich,no lid with k+n 280-290 mains 30 pilot 2turns out leave the needles, Quote Link to comment Share on other sites More sharing options...
LEshee04 Posted April 8, 2011 Author Report Share Posted April 8, 2011 240 main everyone has been sayin at least a 280 Quote Link to comment Share on other sites More sharing options...
sleeper06 Posted April 8, 2011 Report Share Posted April 8, 2011 240 main everyone has been sayin at least a 280 280 with no lid,i have tons of experiance with these pipes,try my set up,if your plug caps ohm out rite and your carbs are clean it will chop perfect,280s with the lid your missing out on power Quote Link to comment Share on other sites More sharing options...
LEshee04 Posted April 9, 2011 Author Report Share Posted April 9, 2011 Now I got the good ole one cylinder firing problem... FML. Quote Link to comment Share on other sites More sharing options...
Larry's Shee Posted April 9, 2011 Report Share Posted April 9, 2011 Wouldn't neccessarily trust what he said. Look to see what jets you have in now, write it down for reference. How do your plugs look after your little ride? Quote Link to comment Share on other sites More sharing options...
LEshee04 Posted April 9, 2011 Author Report Share Posted April 9, 2011 Well after a frustrating day of diagnosing problems that didnt exist i overlooked the simplest of them all! I had a dead plug on the right cylinder. I took carbs out which had stock 200 mains in. I replaced with 220's kept the pilot @ 25 i synced carbs and adjusted the floats on right carb cuz one was bent down. Rode for about 45 minutes idles great revs smooth low-hi, and hits powerband great!!! Plugs look good to me. I jus found some 240 mains in my tool box i may end up slappin in. I need to rid myself of the damn TORS, makes jetting take 3x longer then it should Quote Link to comment Share on other sites More sharing options...
chevybanshee91 Posted April 9, 2011 Report Share Posted April 9, 2011 i believe stock setting.. those carbs come with 220 from factory.. and with pipes i think your 240's would be perfect. give it a shot and let us know Quote Link to comment Share on other sites More sharing options...
LEshee04 Posted April 9, 2011 Author Report Share Posted April 9, 2011 They vary by dealer im told, mine had 200's from stock i know nothing on the bike was ever touched before. I might try the 240's tmrw but i got the shits of takin the carbs off. With the problems i been havin i had the rights side carb off prolly 6 times today Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.