loeyboy Posted February 23, 2011 Report Posted February 23, 2011 Without using any special tools, what is the easiest way to remove the tie ends from the steering stem and the spindles? A little tap of the hammer is not working! Also, who makes a decent pair of +2 rods with tie ends? Thanks! RC Quote
ionroller Posted February 23, 2011 Report Posted February 23, 2011 I use a brass punch, whack it once and they pop every time. Get on ebay for the tie rods. Quote
crash&burn Posted February 23, 2011 Report Posted February 23, 2011 I flip the castle nut and run just about level with threads on the tie rod and whack it and it falls out hit a little harder next time it will come out.... and if you need new tie rods anyways beat the hell outta them Quote
MN SHEE Posted February 23, 2011 Report Posted February 23, 2011 hit the spindl next to the tie rod and dont use a pickle fork just tears the shit out of the boot Quote
shakar Posted February 23, 2011 Report Posted February 23, 2011 +2 flip the castle nut and have at It Quote
fastquad02blaster Posted February 24, 2011 Report Posted February 24, 2011 +2 flip the castle nut and have at It My thoughts exactly. Do it now. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.