Jump to content

cub wont idle


Recommended Posts

None of mine idle for shit. If they do idle when I set the the carbs up, I change it (at the carbs) so that they don't....... and sometimes I'll leave the cable adjuster on the throttle housing loose enough that I can idle it up after it gets warm, then back down if its cold.. I always had that same problem, that it'll idle to the moon when cold, then won't idle for shit when warmed up. If i mess with the air screws to try to fix the problem, then the weather (air density) changes - the idle changes too. This is on alky, though - and drag race only.

Link to comment
Share on other sites

i have small bore shears inframes 35mm keihns boss intake clean up port job 4 degrees tming advance

mine has tuned and it will only idle for 5 seconds or less but you really dont want it to idle for to long stay on the pipe it a 2 stroke

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...