talleywhacker85 Posted May 18, 2010 Report Posted May 18, 2010 Went to race this past weekend and had trouble starting the bike. Get it running and it runs only on one cylinder. Looked everything over and could find nothing wrong. Started it back up and it ran fine during the race. After the race it started doing the same thing again, so we loaded up and left. Next day the bike wouldn't start at all. Checked to see if its getting fuel and fire its getting both. Checked compression left cylinder 150psi right 143psi after 7 kicks. Any ideas? Thinking electrical any help would be greatly appreciated. Quote
firebanshee Posted May 18, 2010 Report Posted May 18, 2010 Are you getting spark?Did you check the reeds? Quote
talleywhacker85 Posted May 18, 2010 Author Report Posted May 18, 2010 Are you getting spark?Did you check the reeds? Getting spark, reeds look great. Can't figure it out. Quote
pr0blumz Posted May 18, 2010 Report Posted May 18, 2010 (edited) Getting spark, reeds look great. Can't figure it out. You check your harness to see if it may be shorting out to the frame? Edited May 18, 2010 by pr0blumz Quote
dirtydownunder Posted May 18, 2010 Report Posted May 18, 2010 did you check the coil or pickup up resistance ? do you have another cdi you could try ? Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.