NateDiggity Posted January 28, 2010 Report Posted January 28, 2010 A buddy of mine has a raptor 660 with a TON of aftermarket parts... He lost interest in it, bought a rhino. After a few trips to the sand he wanted to hit the treeshots again so he picked up a cheap banshee from a friend. Question is, short of us taking a bunch of parts off the raptor and holding them up to the shee, does anyone know off the top of their heads what transfers? Does the axle? I thought I was told the shee axle isnt dead centered... Quote
locogato11283 Posted January 28, 2010 Report Posted January 28, 2010 all the hubs for sure fit, so those and the wheels/tires. i have been told that the rear shocks will also work, but youd have to verify that yourself. i think even the axle may fit. with some quick measurements and what not, you should be able to tell on a lot of it. Quote
sinisterboo Posted January 28, 2010 Report Posted January 28, 2010 the front and rear shocks fit, but make the banshee sit waaaaaaayyy tall, and cause spooky steering characteristics... Quote
jbooker82 Posted January 28, 2010 Report Posted January 28, 2010 the axle will work but it will be extend farther on one side than the other. Quote
NateDiggity Posted January 29, 2010 Author Report Posted January 29, 2010 the axle will work but it will be extend farther on one side than the other. Thats what I was afraid of, any idea how much? Quote
jbooker82 Posted January 29, 2010 Report Posted January 29, 2010 They said about 3/4 inch. http://www.bluetraxx.com/forums/yamaha-yfm660r-raptor-2001-2005/57254-will-banshee-axle-fit-raptor-widen-rear.html Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.