87sheerips Posted November 16, 2009 Report Posted November 16, 2009 Ok guys, I have been working on developing high-end graphics kits with a great friend of mine. He owns a large custom graphics company and we are teaming up to offer something completely different and new for the Banshee crowd. The pics here are of the very first prototype, which we have to make some refinements to but I just couldn't wait to post pics. Many colors and design options will be available, but this it the first design we went with and what I will begin to offer. Price is still up in the air, as we still have to gather all of our costs to bring it to market. So, I am looking for some feedback, as well as suggestions. PM me if you are interested in getting a kit, and I will be updating here and on my website of the other options that will be available. The vinyl that is used here is just awesome, installed VERY easy with zero bubbles. It is a special vinyl that is designed to install with ease and hold up to YEARS of abuse. Before: After: Quote
sheerider20 Posted November 16, 2009 Report Posted November 16, 2009 that looks pretty sick to me. it would work great with someone that has race cut front an back Quote
87sheerips Posted November 16, 2009 Author Report Posted November 16, 2009 that looks pretty sick to me. it would work great with someone that has race cut front an back yea, thanks man... We are going to develop a sticker for the rear plastics eventually too... Quote
Rodneya Posted November 16, 2009 Report Posted November 16, 2009 Would you be able to perforate the tank stickers so that they can be used on the 5 gal tanks without peeling off? Quote
VegasJeff Posted November 16, 2009 Report Posted November 16, 2009 yea, thanks man... We are going to develop a sticker for the rear plastics eventually too... those look great! just more designs and colors and those should sell like hot cakes. Quote
papa_smurf49319 Posted November 16, 2009 Report Posted November 16, 2009 X2 on the perforated for the ims 5.6 gallons! Quote
87sheerips Posted November 17, 2009 Author Report Posted November 17, 2009 What do u mean by perforated? This vinyl is seriously top notch, I think it should stick fine unless I am missing something here Quote
Bansh-eman Posted November 17, 2009 Report Posted November 17, 2009 I think they may be talking about how the IMS tanks "seep" and will make paint or stickers peel because they are pores’. That’s what I assume they are talking about. Some say that if you perforate the stickers it will keep the fumes from building up and creating bubbles that will peel. I don't think it will matter but I haven't tried it. Quote
papa_smurf49319 Posted November 17, 2009 Report Posted November 17, 2009 Yes the tanks breath and if you put a regular sticker on it, it will bubble up. If you perforate the stickers it helps with the bubbling. Quote
87sheerips Posted November 17, 2009 Author Report Posted November 17, 2009 Maybe they should redesign the tanks LOL..... Quote
papa_smurf49319 Posted November 17, 2009 Report Posted November 17, 2009 All plastic gas tanks breath. The only reason you can put stickers on the stocker is due to the tank cover. Quote
87sheerips Posted November 17, 2009 Author Report Posted November 17, 2009 yea, I understand. Let me see what I can do about that. This vinyl actually has perforations on the back to eliminate any bubbling upon installation. This perforation is not all the way thru, however. Quote
quaddad817 Posted November 18, 2009 Report Posted November 18, 2009 id like to see more graphics kits out there. my favorite is alba because they are verry high quality! will these be simmalar? i wish i could find another stars and stripes kit like the one i have now but its disscontinued! you should make one.... Quote
donkeypuncher Posted November 18, 2009 Report Posted November 18, 2009 looks pretty good! i think it would look a little better if the "banshee" and the little graphic below it were switched around though. seems like the banshee would fit better that way. just my .02. Quote
87sheerips Posted November 18, 2009 Author Report Posted November 18, 2009 looks pretty good! i think it would look a little better if the "banshee" and the little graphic below it were switched around though. seems like the banshee would fit better that way. just my .02. We are actually re-sizing and moving the 'Banshee" on the next run.... it will all look proportioned, this was the FIRST kit produced from scratch. I guarantee this vinyl to be the best quality on the market. I worked with the graphics company to come up with the best combination of materials while keeping the cost within reason. When all said and done, i will be offering a nice warranty with these kits. Up to 10 years against manufacturers defects! Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.