nitrocircus Posted November 14, 2009 Report Posted November 14, 2009 (edited) here are some pics of my port job, i had them done from a place on e-bay, cant remember the name right now, but let me know what you guys think of the work. i had to pull them off before i could run it becouse of a bad head stud Edited November 14, 2009 by nitrocircus Quote
Paul M Posted November 15, 2009 Report Posted November 15, 2009 interesting....... If it was RB porting out of lansing mich your gunna have a big smile on your face !! Rob does great work , anybody else off ebay I dont know about Quote
AKheathen Posted November 15, 2009 Report Posted November 15, 2009 actually, it looks like it was cut in a jig by a program..... Quote
Paul M Posted November 15, 2009 Report Posted November 15, 2009 actually, it looks like it was cut in a jig by a program..... the Pics are blurry on my end ! if it was cut in a jig it wasnt by RB Quote
camatv Posted November 16, 2009 Report Posted November 16, 2009 wow looks like he sprayed some carb cleaner down it to remove the factory black paint and then touched up the intake a lil bit.. hope you didnt pay much for that one. Quote
Rodneya Posted November 16, 2009 Report Posted November 16, 2009 Try take some more pics, but from a bit further away so that the camera can focus properly. Or see if your camera has a macro setting for closeups. (There is sometimes a flower on the setting button for this.) It a bit hard to see what is going on up at the top of the intake. Quote
mopar1rules Posted November 16, 2009 Report Posted November 16, 2009 (edited) i'd like to see some pics of the exhaust port (cylinder side) and pics of the transfers and boost. that intake looks like nothing special. they appear to have only have been "knife edged" a little and the boost port entrance looks to have been touched up some. big deal. hope you didn't pay much for that "port job". Edited November 16, 2009 by mopar1rules Quote
nitrocircus Posted November 16, 2009 Author Report Posted November 16, 2009 i'd like to see some pics of the exhaust port (cylinder side) and pics of the transfers and boost. that intake looks like nothing special. they appear to have only have been "knife edged" a little and the boost port entrance looks to have been touched up some. big deal. hope you didn't pay much for that "port job". i cant rember much about them i got them done 2 years ago and never used them i think he said it was a stage 3 port Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.