nitrocircus

I have a nice set of PC I'll get pics if u want them

I have a 421 cheetah cub by redline. Right now I have a nice pair of pc pipes on it looking to upgrade would like to trade also can have cash on top of my pipes

so u recommend pump gas over race fuel? i like he 110 idea because i have it easily avalible and the people i ride with also run it.

that's what i was kinda thinking but was told the lead and oil in race fuel is good for a engine. i just checked out redline I'm going to go with them, it looks like lots of menbers here have good things to say about them. so what cc should i go with for 92 octane i also have a adjustable stator plate for timing?

this says clean up porting but i will check it out.

ebay! http://www.ebay.com/itm/Banshee-421-68mm-4-mil-4mm-Cheetah-Cub-Cylinder-Top-End-Big-Bore-Kit-Domes-Oring-/201466177492?hash=item2ee851e7d4:g:3eUAAOSwLzdWRNIM&vxp=mtr

lol who is that? the domes come with the kit so i need to know prior to ordering

ok my stock cylinders are trashed, so I'm going with a 421 cheetah cub. I plan on ordering it this weekend but am lost on what dome size I should get with it. i was told if i set it up for race fuel i could get more life out of the top end. is that true? we have 110 avalible at the pump but what size domes should i get for 110. otherwise we have 92 at the pump. what do u guys recommend i do?

tors and brake are all eliminated. I haven't done a leakdown. I don't have a tester for that. I gaped the module with a business card. it has good spark and I even put fuel in the cylinders and nothing but a few pops.

ok my banshee has spark, fuel, and compression. but will not start. when I built the motor I had to swap the plug on my stator to match my wire harness. it is a new rm 200w stator and the wires were different colors. could I have some wrong that would make it spark wrong and not run? it fires once and a while but just a pop and a lil puff of smoke. I was told that I wired my stator wrong and its firing at the bottom of the stroke is this true? and could anybody help me wire it correct?

what grounds to the frame?

i think it is not getting fuel in the engine. could this be my floats being out of wack? i know there is gas in the carbs but my plugs are dry? i have 34mm pwk's