32:1 castor 927

[00sheerzr]

hi i just got my banshee a few weeks ago and i was told to run 32 to 1 i use castor 927 and i dont see any smoke after its warmed up and it smeels real good im worryd because i dont see smoke out of the exhaust , is that bad?

[crustydemon]

I've never used that but I know with the Klotz Benol I use at 32:1 it doesnt hardly smoke at all once your jetted perfect. Just make sure your jetted right on . I just put Techniplate in one of my bikes and its smoking more than Im used to but my jetting is also off so I dont know how it will be but it says low smoke.

[danhercules]

hi i just got my banshee a few weeks ago and i was told to run 32 to 1 i use castor 927 and i dont see any smoke after its warmed up and it smeels real good im worryd because i dont see smoke out of the exhaust , is that bad?

 

 

I run Castor 927. I get no smoke when its warm, just when she is cold. I think your fine.

[00sheerzr]

ok good i was unsure because i have never seen a 2 stroke that doesnt smoke i even changed thhe gas and mixed up a new batch i thought i forgot to mix lol

[shoe's blackshee]

ok good i was unsure because i have never seen a 2 stroke that doesnt smoke i even changed thhe gas and mixed up a new batch i thought i forgot to mix lol

 

im running castor 927 in my banshee to and once it is warmed up it doesnt hardly smoke. its normal as far as i know.

[tedd1]

I ran 927+110 gas for a long time @ 40:1 with 0 problems. As stated above, if you're jetted right, you are good.