locogato11283 Posted October 30, 2009 Report Posted October 30, 2009 welcome to the HQ sponsor family! Quote
blowit Posted October 31, 2009 Report Posted October 31, 2009 welcome to the HQ sponsor family! Thanks Tyler. We have been hanging around for years so figured it was time to hang our sign. Quote
Powerstroke Posted October 31, 2009 Report Posted October 31, 2009 Welcome Brandon I could have used one of those water pump gears about a year ago very nice looking piece. Quote
Meat Posted October 31, 2009 Report Posted October 31, 2009 Awesome. http://www.mullengineering.com/ Quote
Washburn Posted November 1, 2009 Report Posted November 1, 2009 Awesome. http://www.mullengineering.com/ HELL YES!!!! Blowit/Brandon is a very smart man. A genious in his field I think. Quote
blowit Posted November 1, 2009 Report Posted November 1, 2009 HELL YES!!!! Blowit/Brandon is a very smart man. A genious in his field I think. Thanks for the kind words Washburn. However, I don't think I will be winning any engineering awards this year.... Not sure if I will ever be that smart... We do try to push the envelop a bit in everything we do. It can be tedious but we enjoy the sport and enjoy being a part of it's advancement... Mull Engineering Quote
locogato11283 Posted November 1, 2009 Author Report Posted November 1, 2009 Thanks for the kind words Washburn. However, I don't think I will be winning any engineering awards this year.... Not sure if I will ever be that smart... We do try to push the envelop a bit in everything we do. It can be tedious but we enjoy the sport and enjoy being a part of it's advancement... Mull Engineering if obama can win a nobel peace prize, surely you can win an engineering award.. Quote
Glamis321 Posted November 2, 2009 Report Posted November 2, 2009 if obama can win a nobel peace prize, surely you can win an engineering award.. haha x2!! Quote
87sheerips Posted November 3, 2009 Report Posted November 3, 2009 Awesome! Hey I checked your site and am very interested in this new "venturi" filter setup. Can you delve into it a little more, as well as HP gains? I understand the CFM gains, but have you tested on a Dyno or anything at all? Even seat of pants? Thanks! Quote
blowit Posted November 3, 2009 Report Posted November 3, 2009 (edited) Awesome! Hey I checked your site and am very interested in this new "venturi" filter setup. Can you delve into it a little more, as well as HP gains? I understand the CFM gains, but have you tested on a Dyno or anything at all? Even seat of pants? Thanks! We have not found time to do any back to back dyno testing but our math, flow bench, and ass dyno shows various gains (2-5HP) depending on what we are comparing to. The big key on the venturi system is the negative pressure which induces better vaporization of fuel and more fuel drawn in. We did our flow tests with a complete assy of carbs and filters. I wish we had more room to do this on big carbs but we have to stay within certain parameters to make it work right and that would make the big end of the tube much too big to fit in the chassis. We may develop another solution soon but just have to see. Edited November 3, 2009 by blowit Quote
87sheerips Posted November 3, 2009 Report Posted November 3, 2009 We have not found time to do any back to back dyno testing but our math, flow bench, and ass dyno shows various gains (2-5HP) depending on what we are comparing to. The big key on the venturi system is the negative pressure which induces better vaporization of fuel and more fuel drawn in. We did our flow tests with a complete assy of carbs and filters. I wish we had more room to do this on big carbs but we have to stay within certain parameters to make it work right and that would make the big end of the tube much too big to fit in the chassis. We may develop another solution soon but just have to see. Cool, cool... So will this work with my gas 35PWK's and/or Alky 34 PJ's? Quote
blowit Posted November 3, 2009 Report Posted November 3, 2009 Cool, cool... So will this work with my gas 35PWK's and/or Alky 34 PJ's? No, that is what I was trying to say above. The opening of say a 38mm carb is actually pushing 60mm. We have to be looking at how much room is in there for us to get the proper designed venturi in there. As of now, we have two designs for the bigger carbs but nothing produced as of yet. The ones we offer on the site are for stock carbs only. By the way, did you get our banner and able to get it posted? Hoping those files would work. Quote
87sheerips Posted November 3, 2009 Report Posted November 3, 2009 No, that is what I was trying to say above. The opening of say a 38mm carb is actually pushing 60mm. We have to be looking at how much room is in there for us to get the proper designed venturi in there. As of now, we have two designs for the bigger carbs but nothing produced as of yet. The ones we offer on the site are for stock carbs only. By the way, did you get our banner and able to get it posted? Hoping those files would work. Dont know yet, my buddy who does everything on my site needs to play with it.... Ill let you know! -JD Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.