AKheathen Posted August 19, 2009 Report Posted August 19, 2009 340 main when 1000ft+ no lid, k&n proflow, stock carbs, NO AIRLEAKS. the pcp's can be fuel hungry. 350-360 asl. i need to design a high flow snorkel.....12" water or more, and i'm almost sure to be sucking water and fighting runaway carbs Quote
2SLO Posted August 22, 2009 Author Report Posted August 22, 2009 (edited) alright i ordered 2x 290s 2x 260s 2x 25s 2x 27.5s what do you mean by setting the needle on the third clip? edit: on the vitos website, i should order for the stock 26mm carbs correct? the other ones offered arent listed.. hmm. i am once again not sure what to order. Edited August 22, 2009 by 2SLO Quote
evro Posted August 27, 2009 Report Posted August 27, 2009 ughhhhhhhhhh the top of the needle has five notches notches in it, each notch being a setting. the needle clip snaps into one notch, thereby setting your needle at that specific height. always have each of your carb needles set to the same notch. the higher up on the needle the clip is, the leaner your needle is set. the lower the needle clip is, the richer your needle is set. third clip is the middle position. hope that helps... Quote
2SLO Posted August 27, 2009 Author Report Posted August 27, 2009 the top of the needle has five notches notches in it, each notch being a setting. the needle clip snaps into one notch, thereby setting your needle at that specific height. always have each of your carb needles set to the same notch. the higher up on the needle the clip is, the leaner your needle is set. the lower the needle clip is, the richer your needle is set. third clip is the middle position. hope that helps... awesome. thanks alot man. im going to take them apart again tonight i think.. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.