Pasi S. Posted July 24, 2009 Report Posted July 24, 2009 I just ordered a set of used Toomey T5 pipes to replace my stock pipes. questions are: -What reeds or reed cages will fit to T5 Quote
kubitza123 Posted July 24, 2009 Report Posted July 24, 2009 I would order some turbonator's off ebay first thing oh STAGE 3'S LMAO Sorry couldn't resist Quote
Pasi S. Posted July 24, 2009 Author Report Posted July 24, 2009 I would order some turbonator's off ebay first thing oh STAGE 3'S LMAO Sorry couldn't resist I ordered 2 set Quote
Pasi S. Posted July 24, 2009 Author Report Posted July 24, 2009 (edited) Yes I know that! I Edited July 24, 2009 by Pasi S. Quote
brugal Posted July 25, 2009 Report Posted July 25, 2009 Yes I know that! But can someone tell me if there is a big difference between those two Boysen reeds or should I get a set of VF3 Quote
firebanshee Posted July 25, 2009 Report Posted July 25, 2009 At sea level with pod filters and those pipes you will be around a 27.5 on the pilot and 330 on the main, try the midlle clip on the needle and around 2 turns on the air screw. You can use a dremel and modify your stock plate, but i have a cheap 35$ plate off ebay in my drag bike. :cool: Quote
Pasi S. Posted July 25, 2009 Author Report Posted July 25, 2009 You didnt say you had a jet kit. You dont need reeds with those mods.Spend the money on something else. Rick Stator timing plates are made of shit. I Quote
Pasi S. Posted July 25, 2009 Author Report Posted July 25, 2009 At sea level with pod filters and those pipes you will be around a 27.5 on the pilot and 330 on the main, try the midlle clip on the needle and around 2 turns on the air screw. You can use a dremel and modify your stock plate, but i have a cheap 35$ plate off ebay in my drag bike. :cool: :biggrin: Thank you for the information that I was going to ask in a near future!! I will search your timing plate from Ebay. Quote
Overboost Posted July 25, 2009 Report Posted July 25, 2009 Rick Stator timing plates are made of shit. agreed, get a chariot performance unit, nice billet plate is about the same cost as rick stator cast garbage. Quote
Building my First Posted August 2, 2009 Report Posted August 2, 2009 Just get some carbon reeds for your stock cage. With T5's I'd put some High Tension Carbon Tech Reeds in it. Quote
Pasi S. Posted August 2, 2009 Author Report Posted August 2, 2009 Just ordered a set of CarbonTech Hi reeds. I hope they are good. Today I was riding with my Banshee.. last time when it Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.