GrMeyer Posted July 7, 2009 Report Posted July 7, 2009 I need some orings for my noss head. Anyone know the specs of the orings? Quote
shanYE west Posted July 7, 2009 Report Posted July 7, 2009 why not just order a set from Dave Noss and support one of the site sponsors? Quote
jbooker82 Posted July 7, 2009 Report Posted July 7, 2009 And you need special viton o rings. I dont know the specs but I do know they are not the ones you can get at your local hardware store. Quote
GrMeyer Posted July 7, 2009 Author Report Posted July 7, 2009 I have the head but I own a pool company and deal with O-rings alot. So I was going to look them up and see if I can get them cheaper for him as well... Quote
dlnoss Posted July 8, 2009 Report Posted July 8, 2009 The oring sizes are: 2-011 2-026 2-039 Viton 2-046 The largest one isn't a standard size. I have them custom molded. I buy all of these in quantities of 1,000 to 10,000 to try to get good enough prices to make a little profit on them. -David Quote
BigRed350x Posted July 8, 2009 Report Posted July 8, 2009 That's a cool sponsor... Sharing the specs for his stuff and even letting the guy know that one size o-ring is a custom one. Dave is a nice guy. Quote
GrMeyer Posted July 8, 2009 Author Report Posted July 8, 2009 Well thanks Dave you just saved me some time in mic'n and seaching the books. Ill see what I can do Quote
blowit Posted July 8, 2009 Report Posted July 8, 2009 The oring sizes are: 2-011 2-026 2-039 Viton 2-046 The largest one isn't a standard size. I have them custom molded. I buy all of these in quantities of 1,000 to 10,000 to try to get good enough prices to make a little profit on them. -David That is rather respectable David. :thumbsup: I too would recommend just buying from Noss. How much time are you wasting sourcing them? Brandon Quote
Snopczynski Posted July 8, 2009 Report Posted July 8, 2009 That is rather respectable David. :thumbsup: I too would recommend just buying from Noss. How much time are you wasting sourcing them? Brandon Im thinking for $23.00, you can get the right ones and not waste a ton of time trying to look them up yourself. Quote
GrMeyer Posted July 8, 2009 Author Report Posted July 8, 2009 im trying to send the saves on to you as well as Dave. So all in all I have a buddy that I work with going to be company that we get are o-rings from on friday. It might take some time to figure some things out but in the long run i hope it works out for everyone on the other end. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.