put kn pods on... wtf

[springer]

is this normal. i figured i might lose a little bottom end, but it has no power until i get like half throttle then she runs great. i thought if anything, the pods would make me run lean, but it feels like i am way rich. anyone else experience this and have any advice?

thanks

[quikshee]

Pods really suck in the air compared to an air box, they will make you run lean if you don't rejet.

 

Your jetting is off, when I put my pods on it made a deep sucking noise until I started getting closer on the jetting.

 

 

[shee4speed]

what was your old setup? Did you even try to rejet?

[springer]

i havent rejetted yet. i already had a kn filter with the air box completely removed (except a little piece to hold up the coolant tank) so i thought i might be ok. obviously i was wrong. ya, mine is making a huge sucking sound as well. i just bought the bike about 2 months ago but shee has seemed to be jetted pretty good. no noticable problems. how many sizes should i bump the mains? anything else i should do?? i was thinking about moving the needle clip position, but i am totally new to jetting so i dont know for sure. any help would make a huge difference.

thanks

[shee4speed]

the mains are for topend.You prob.need to adjust your needle a clip and your air screw a tad.

[quikshee]

^^^ What he said.

[springer]

cool, thanks guys. i was gonna start there but just needed some reassurance in my blind knowledge. hope i can get it going good, im bout to head to little sahara.

thanks for the help

[RagunCajun]

The main controls 3/4-WOT i believe. He said no power until 1/2 throttle. air screw and pilot is idle to 1/4. 1/4-3/4 is needle and needle clip position.

[vulvafan537240]

dont leave it running lean or youll smoke it