quikshee Posted May 21, 2009 Report Posted May 21, 2009 I just bought a .030 milled stock head and the person I bought it from said his squish was at .36", adding another head gasket would remedy this correct? Where is the best place I can find a cheap paper head gasket, the only ones on ebay are the metal ones. Quote
mark101180 Posted May 22, 2009 Report Posted May 22, 2009 id look for another solution. double gaskets always seem to leak on anything Quote
Rodneya Posted May 22, 2009 Report Posted May 22, 2009 Measure the squish with the head on your motor before you decide to do anything Quote
Powerstroke Posted May 22, 2009 Report Posted May 22, 2009 .360" is huge .036" good enough for me. Like rodneya said measure it on your motor first. Quote
swrbansheeboy Posted May 23, 2009 Report Posted May 23, 2009 make sure and toss an old gasket in there to get a correct measurment... Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.