kliped Posted March 25, 2009 Report Share Posted March 25, 2009 hey hows it going, i am having a strange problem with my banshee. the clutch lever on the motor is seized in the clutch pulled in position and wont move at all. the clutch it self is engaged. i tried adjusting the phillips head stud in the middle but that didnt do anything. this all happened when i was on the dyno. i made my first pull in 4th and after the pull i pulled in the clutch and started downshifting but i had no clutch, there all of a sudden was a whole lot of slack in the cable. well i didnt know what to think so i just took the slack out with the adjuster on the lever. i then made another pull and same thing happened but now i ran out of adjustment and the clutch lever on the motor was maxed out and wouldnt move in either direction. Quote Link to comment Share on other sites More sharing options...
Bansh-eman Posted March 25, 2009 Report Share Posted March 25, 2009 might have welded the push rod/ ball/ actuator/ adjuster. any of those together. Quote Link to comment Share on other sites More sharing options...
kliped Posted March 25, 2009 Author Report Share Posted March 25, 2009 might have welded the push rod/ ball/ actuator/ adjuster. any of those together. damn....how hard is that to fix or am i fucked? Quote Link to comment Share on other sites More sharing options...
LS1Inferno Posted March 25, 2009 Report Share Posted March 25, 2009 well it depends on how bad you welded it. if you just welede it to the ball it might come out on the clutch side, if you did like me an dmushroom both ends you have to put a puller and beak the rod and ball apart hopefully the screw it welded better then the rod, (uaually is) and then pull the rod out of the other end. youll need a new rod, maybe clutch actuator, and a pancake bearing Quote Link to comment Share on other sites More sharing options...
kliped Posted March 25, 2009 Author Report Share Posted March 25, 2009 thanks for the help guys, in fact the rod and ball and lever did weld together. i got them out but at a price, the long lever didnt come out the correct side, so now i have a hole in my case, but a little bit of the JB weld should fix that right up.... Quote Link to comment Share on other sites More sharing options...
DallasGDub Posted March 25, 2009 Report Share Posted March 25, 2009 So you did not split the case? Quote Link to comment Share on other sites More sharing options...
kliped Posted March 25, 2009 Author Report Share Posted March 25, 2009 So you did not split the case? nope, it came clean out the left side lol. i now can see complete through the hole to the other side lol Quote Link to comment Share on other sites More sharing options...
bbcmudtruck Posted March 25, 2009 Report Share Posted March 25, 2009 How the hell did you pull that off? Quote Link to comment Share on other sites More sharing options...
LS1Inferno Posted March 25, 2009 Report Share Posted March 25, 2009 How the hell did you pull that off? the rod welded to the lever too, he hit the rod to break it loose from the lever and input shaft.....he hit it a little hard. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.