05.Banshee.SE Posted September 26, 2008 Report Posted September 26, 2008 I went to test run my 'Shee down the street, then it started firing only one cylinder. I popped the carb off and saw that this circled part, (the jet connects to the bottom part of it), is moving up and down. Isn't there supposed to be a washer or something on the bottom keeping it from doing this? Quote
05.Banshee.SE Posted September 26, 2008 Author Report Posted September 26, 2008 ...Is anyone around? It wasn't completely firing on one either, it was in and out with gas flow, so this is my problem. Quote
Tim Potteiger Posted September 27, 2008 Report Posted September 27, 2008 That picture resembles a needle going in a jet, but it is way too blurry to make out what you are asking. Quote
gregbowler Posted September 27, 2008 Report Posted September 27, 2008 my guess is the main jet rattled out in the bowl Quote
05.Banshee.SE Posted September 27, 2008 Author Report Posted September 27, 2008 The part the Jet screws into won't stop sliding up and down. Is the main jet the only piece that keeps it from going up and down? Quote
shee4speed Posted September 27, 2008 Report Posted September 27, 2008 there should be a brass washer there also. Quote
05.Banshee.SE Posted September 28, 2008 Author Report Posted September 28, 2008 there should be a brass washer there also. I ripped apart the other carb and noticed that I was missing the washer. I was able to get a new one, and a few spares for free. Thanks all. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.