Wiseco Ring Question

[gregrob]

I need just a set of rings to rering my left cylinder.

 

I found the wiseco part number for banshee replacement rings and can get them online.

 

My question is though, I have a 4mil/5m longrod motor with blaster pistons.

 

My bore size is 64.50mm.

 

Should I get replacement banshee 6450 rings, or Blaster 6450 replacement rings?

 

 

Thanks,

[themudgician]

IM NO PRO BUT I WOULD THINK U WOULD WANT RINGS FOR THE BLASTER PISTONS 4 THE BORE SIZE OF YOUR JUGS. MAKE SURE YOU CHECK YOUR RING GAPS TOO.

[bansheejoel]

if your running blaster pistons why would you buy banshee rings :shrug: ? i would think you would want the blaster rings, but im not a pro either lol

Edited September 9, 2008 by bansheejoel

[Bansh-eman]

if your running 795 series piston get the rings for the banshee. if your running a blaster piston (513 series) which your not by judging your bore size, then you would want the blaster rings

[gregrob]

if your running 795 series piston get the rings for the banshee. if your running a blaster piston (513 series) which your not by judging your bore size, then you would want the blaster rings

 

Thanks man.

 

I'm a tard, I'm running 795 pistons, not blasters....

 

Thanks, I'll go with the banshee rings.

 

 

These look right? I'll probably call Andy in the morning and get a set from him, just found these by googling the part number.

 

http://www.mfgsupply.com/m/c/2539CD-atv.html

[Bansh-eman]

yea they look right

[gregrob]

Thanks Bro

[No Limit Powersports]

It doesnt matter all of the 64.5 size pistons take the same ring which is the 2539CD (blaster, 513, 795 etc...)

[lunatic]

It doesnt matter all of the 64.5 size pistons take the same ring which is the 2539CD (blaster, 513, 795 etc...)

 

 

Blaster pistons start out at 66mm but yeah i know what you were trying to say.