stevo3176

Could that be the reason it doesn want to go into first. As a matter of fact now that I think about it the bike does lurch a bit forward when you first put it in gear. The tires will also move if its on blocks and in gear.

I'm pretty sure its an older one cause it sounds like it is leaking when I press on it. It moves the clutch arm fine and it doen't leak too much fluid from what I see but it hisses.

Ihave not stomped on the shifter but the previous owner may have I jjst bought it last month and just got it running good. I think the freeplay is ok I have a magura clutch pull that I am still figuring out. Not sure of what clutch arrows are I use pro honda oil 85w i think just changed it.

Here is the problem I have rencently had trouble getting the banshee to go into first when i stop. It just won't go into first. Then I'll turn off the engine and it clicks right into first no problem.. Is this a clutch issue or what?

No the kit just came with the caps. I do have a vito idle kit but it does nothave any instructions. Plus is works good now I don't want to fiddle around uless I have too. i was just wondering if anyone else opted not to use an idle kits and just used the adjustments on the caps.

And what is roost over by my avatar? <----------

I just took the tors off my banshee and i replaced the caps with aftermarket ones. The ones I got came be adjusted with a screw on the caps which pulls the slides up and down. Can I use this to keep the bashee idleing or do I have to get the idle kit. The ways I have it now it idles fine but I am wondering if I will have problems in the future.

Like the title says. Need and air box no top but with no holes in it. Also I need a stock axle that's not bent.

You guys may want to keep some of those details out of your posts. You never know who looks at these sites. But for me we have a few places in riverhead that we used to ride alot but the dec and parks police started to impound. What a waste of time and tax payer money. Aren't there criminals to catch?

I am selling my honda 2004 450r. It is in very good shape. It comes with new Elka front shocks, new dg nerfs and read skid plate a arm guards and renthal bars. I am located on Long Island I will drive about 80 miles on the Isand to help ship. If intertested sned me an email at stevo3176@yahoo.com

I am selling my honda 2004 450r. It is in very good shape. It comes with new Elka front shocks, new dg nerfs and read skid plate a arm guards and renthal bars. I am located on Long Island I will drive about 80 miles on the Isand to help ship. If intertested sned me an email at stevo3176@yahoo.com

In my opinion a 450r will beat you bike. Unless you got some other mods that you did not mention.

The only reason they are out there is that they have to respond to the complaints that they get. the real problem is that Long Island has changed in a big way in the past 10 years. All the city people decided to move out to Long Island where is is nice and quiet. Tye want it as quiet as posible so they rally together and get the law to work for them. The riders on long Island however don't do sh-t they ride on streets and on private land and b-tch because they get kicked off and impounded. What riders need to do iS get together and get a place where we can legally ride beFore it is too late. Join a group or write some letters to a legislator thats the only way we can get a place to ride without getting in trouble!! Check out www.liorv.org we just had a task forcemeeting last week we could have used more people.

A 1. Suspension dated in my opinion, heavy front end, no bottom end, date all together. 2. No j arms are the only really major differences btw years. 3. J arm s are terrible they are very weak I got hit by a 300ex (not too fast) and it twisted the j arn in half I was surprised how weak it was. 4. Not sure whay they are more expensive on the west coast but I think if you wait it out you will find a good deal. Ask around tell your buddies but don't by an 87 for more tha 1500 even if it is in really good shape.

I had a little play in mine and I thought it was ok, but I was wrong. I drag raced my buddies up and down a mile long stretch of beach like ten times full throttle top speed. Then I stopped to let it cool off. When I hopped back on I started up a little hill and when I got to the apex of it all of the sudden wham I m thrown off the banshee and it is flipping right at me. It stopped before it hit though. So I though a tire fell of or somehting. BHut it was the bottom ball joint dropped out of the a arm and spiked in the ground sending me flying. All i could think of was if that happened 10 minutes before I would had been really messed up or dead. So if you think it might need replacing replace it before you could really get hurt.

I have Xm and I love it. I got it because I want to hear alot of good music at a cheap price. If I want sports I would watch it on TV so that didn't affect my opinion. But if I were to listen to sport i would choose baseball (XM)l over football(sirius). Baseball can be listen to and enjoyed but football needs to be watched to be appreciate. The other great thing about xm is that is is cheaper than sirus for just about the same product. You can also get multi year plans that make it even cheaper. I got mine for 3 years for about 7.80 a month. As for sirius being a ahead on R&D I think that is the farthest thing from the truth. Sirius equipement is garbage compared to xm. There stuff looks like it belongs in some kids car with neon subs, blinky tachs and all that over done stuff. Xm's stuff is clean and easy to use. Plus xm is ahead with the MYfi personal xm reciever. We shall see how well and long it takes sirius to do that. The one thing that sirius has that xm doesn't is Howard. I personally used to love him but I'd much rather watch him on the E channel than to listen to him on the radio. Again I went into sat radio for music not talk shows or sports which I can see on TV any day at home.

It powersportspro.com

I agree that something organized should be done. But the sad thing is that every complains about no where to ride but nobody does anything about it. For example I live on LI and there isn't any place to ride except one moto cross track that is design for advanced motor cylce use. So anyway time comes for the county to decide if there should be a task force to decide if there should be a place to ride. Now you would think some people would show up to voice there opinions, right becuase they feel so upset becasue of they money they spend on registration and so on. But guess what out of all the people on LI who ride on 6 showed up. WOW what a showing, this is the stuff that pisses me off. If all the atv rides banned together we could get a race track around the state capital. There is alot of power in governemtt if you have a lot of people with a lot of voting power. That's where we are screwed there are more people who can ban together to be against us then there are people who will be active in finding a place to ride. My moral instead of crying on the computer about the injustice that NY gives us try to find a group and ban togther to show we do what a place to ride! www.LIORV.org

I have a 2000 frame that I am looking to get rid of the only problem that i know it has is that the frtom plastic mounts are bent and so is on of the head light mounts. Let me know.

I have a banshee cylinder that has a small piece chipped off on the bottom of the intake port. Is that a big deal. It is small like a quarter of a dime sized chip. If you get that...

The tenth letter is Y so I guess it is a 2000. Banshee's vin on the frame has 18 digits from what I remember. The bizarre thing that is throwing me for a loop is that the CDI is the older style it has 2GU-51 on it and it also has the older style plugs. Also the stator also has the older style plugs. That is why I wanted to make sure it was a 2000 or so banshee.

THanks!

I have an axle with hubs make offer.

I have fronts for a banshee red from a 2000 make an offer I live in ny.

Im Having trouble distinguishing all the letters on the vin also they don't seem to match any of the ones listed. There is a sticker on the frame however that I can read. It says 5FK6-010. Im not sure if that helps. When I get the vin I'll post that.