die_infidel

boy oh boy the same thing happened to me only i was riping donuts in front of a girlfriend (which she was against me getting a shee) and the first time I rode it infront of her and i got on it hard in gravel riping donuts until a patch of packed dirt and grass popped up. What ya know I rolled it (didn't hurt a thing) but i ended up walking away with my head down cause i knew she knew she was right. LOL So boys don't show off in front of the ladies cause they will either laugh at ya or get mad at ya.

I'd have to say is great for everything I never found a type of ride I didn't like, but I'd have to say sand pits & dunes really puts a smile on my face. And as for those 4 stroker riders ILMAO I never had a problem with the shee on trails. If you know how to ride it right it's a breeze at any speed. The guys with the 4 strokes just don't like the shee on trails cause once they spot one they know their done for.

Thanks Blue Duece thats about what i figured.

How much worse on gas mileage is that 12 port +4mm stroker engine with dual keihin 34mm carbs and cpi pipes, than a stock shee??

I would think and in a way hope it stays the same. Although since some companies are coming out with raptor plastics for the shee it may trigger yamaha to wanna redesign the shee before it goes. I don't think they would change it though, because if they wanna get rid of it soon changing the look before it goes would be a bad idea. Not to mention yammy wouldn't dump money into the shee just to get rid of it. They would have consumers begging to bring back the shee cause they like new design. Who knows well just have to see.

I'm not into tatoo's, but i must say I LIKE IT!!

hey that not too bad of an idea pimp559. never thought of that

yes i'd be worried about them too. The sad thing is they can have all the paper work in the world saying he can't come near them, but how can that stop a nutcase who is dedicated to his goal and revenge? Well i hope you get the shee taken care of smoothly and hope nothing happens to your sis and her kids. Why do good woman always fall for the bad guy and end up getting hurt?? While the rest of us good guys have to pick from bad women. lol Opposites attrack maybe?? weird huh

WOW! ok guys just calm down and would someone post a pic asap of a raptorshee so we can see if this argueing is worth it??

Well lets put it this way when he gets out and is as crazy as you say then he'll come after you whether you have the shee or not. Which if he does heres your chance to put him back in prison. Sounds to me like a bad guy and needs to stay in prison even though in some way we all are paying for his plesent and well fed stay at prison. Next time you buy something get proof of who your really buying the thing from and not a middle person.

Wait until your sober, then come back with your thoughts about her. just make sure she's not a he/she, sounds too good to be a woman. LOL

lol the last thing i want is some high schooler with little knowledge and experience hacking on my cylinders. lol I'm sure Jim in his younger days has had many messed up jugs. He wouldn't have the knowledge and expertese now without it. Thats why we learn from our mistakes and become more smarter. No mistakes No learning!! I'll put my trust in Jim doing my shee soon as i get the $$$$. So that 12 port stroker can pull a 17/40 pretty good? I know stock gearing would be useless in the first few shifts.

I forgot to mention that ledofthezep. Yes, how is your clutch? A wore out clutch with some slip would be a major issue of loss. Sometimes they'll slip and you wouldn't notice until you race and get beat easy especially by a 400ex.

LOL No $hit!! 15,000 for a damn yfz?? damn

LOL you guys are funny I would bid, but doesn't list a radio or tell what color. LOL I must say the people biding are the dumbest mother fo's on the planet. Thats a classic, someone that rich can't put a pic or a bigger description. Can you say SCAM haha. I sure the hell ain't paying $800,000 for that. damn

Some pistons have a oversize number stamped on the piston head. Usually in thousandths over. You would have to take head off to check. If not than measure the cylinder's diameter in mm's, stock diameter is 64mm. Then turn the crank until piston is all the way down and measure from top of cylinder to piston head in mm's, stock stroke should be 54mm.

Either something wrong with your shee or that dude with the ex has more mods than he says. You should beable to beat him even with the exhaust on the ex. How are you holeshoting and shifting?? Pipes on a 4 stroke don't give that much more power compared to pipes on a 2 stroke.

If it can be done pm with a price or info. Even if its steel that could be painted silver is fine. I just can't get the plastic to take a primer and paint. I even ruffed up the plastic to hold primer.

I hate to say it, but better you than me sucka!! lol Wow i feel bad for ya your pretty much screwed.

I wanted the same style as stock, but in a chrome or alumunim. I painted my stock black plastic one silver and looks awesome and not so plain. Problem is it's peeling now.

His site is under construction. Just pm he's a great guy and isn't shy to give info about his stuff. Call him Jim

Sounds like a good idea for here. Any takers? Or should i say discount givers lol?

I have the same problem since the day i bought it from dealer. I tore em apart several times cleaning replacing parts and got nowhere. I posted it in here to and they all said clean the carb LOL so i dunno nothing works. Still is a mystery to me and makes me mad.

Yes, I seen the pic of raptor plastics for sale that go right on the shee in front. I would also like to see what the raptor plastics look like on the shee. I thought it was dumb too, I mean come on does every yammy quad gotta look like a craptor, but from those who seen them on the shee said it looks bad ass and nothing like the raptor. So i dunno? Lets see a pic and conclude.

Whats does the 4mm stroker do give more low end torque?