vdubn

What are you looking to swap for?

I have a kick starter in perfect shape, no rattles, snaps into place, etc. $45 shipped, and I will toss in a stock shifter with the rubber, etc. Let me know, Dean

I have a set of VF2's, and can ship them Priority mail to you so you can have them by the weekend. Asking $100 + shipping for them. Shipping is only $6. Let me know, Dean

I have a like new set of +2 +2 Chromoly front A-Arms that have literally less than 2 hours ride time on them, includes the arms, the tie rods, and brand new tie rod ends, as well as all of the hardware (including brand new bearing kits installed and billet brake line clamps). They were made by Metal Tech, and the arms raw were $460, powder coating was $55, line clamps were $40, Tie Rod ends were $50, and bearing kits were $80. Total of $685 into these. Need to get $350 + shipping for these. Pics can be found here, and I can end the auction early if you want them. Click Here

This is a fresh Branshee Transmission that was just machined by A&S Racing. It shifts like butter, and is perfect for dune riding. It is not an override, but A&S did some tweaks to make it shift nicely under load. It can be shifted without the clutch or with under load, I always shifted with the clutch, but was told that it can be shifted without in a drag racing situation. It can also be backloaded without issue since it isn't an override. All gears are in perfect condition, this has 2 hours ride time on it since the work was done. Includes the bearings, the shift shaft, the shift rod and ball, all gears and the shift drum with a brand new Cascade shift star (modified also for cleaner shifting). No issues finding neutral in this trans, shifts perfectly. I have over $400 into the transmission alone. $275 for everything you see in the pic

All PMs Replied

Here is what is left, let me know if you want any of it. Click Here

I just sent you a PM, I want the paddles if they are in good shape....

Bump

Looking for Xtreme haulers on 10" wheels, 9 or 10 paddle. Let me know whatcha got

Can you post a pic, or send pics to [email protected], I need some paddles just like these.

I have a set of these in great shape, from the bike I am parting $110 shipped for the set (anywhere within the 48 states). Paypal accepeted. Here is a pic of them:

Ok everyone, I got it all packaged and dropping off in a few minutes, you should all have received the tracking info through email.

I see you responded, but can't see what you wrote in the message... let me know if you need anything

They are 5" or 6" long by 3.5" diameter I believe, I will check when I get home.

Thanks guys, I got almost everything tore down last night, and working hard to start shipping out tomorrow. Most everything will go via FedEx ground, and all tracking info will be emailed to the addresses listed in the paypal payment. If you need a tracking number, just shoot me a PM and I will get it to you. I have a ton of stuff to coordinate, so trying to get it all out fast, and at the same time make sure that packages get to the correct buyers. If I have any questions, I will shoot people PMs. Dean

I have a crappy one that will work, for $25 shipped, and I have a nice stock one, that is in perfect condition, tight, no rattles, $45 shipped. Let me know, Dean

All PMs replied to

Sure, I can do it for $275 shipped. Paypal is [email protected]

Here is the newest list, a few more items have sold: First, these are the items that are left: - Keihn 35 PWK Airstriker Carbs - $275 (these are like new with polished caps and a throttle cable is included) - Laker Plastics (race cut front and rear black, literally have one weekend on these, they list for over $500) - $350 shipped within the lower 48 states - Powder Coated Frame w/title (Candy Purple over Silver, just coated a month ago) - $400 - Purple Powder Coated Front late model Spindles that match the frame - $75 - +2 Wider, +2 forward Metal Tech Front A-arms, with tie rods and brand new Tie Rod ends (These were $460 + $60 for Powder Coat, and $50 for the new tie rod ends) - $350 - Rear Shock, based on 2002 Stock shock, rebuilt and revalved by I-Shock, with Eibach H.D. Spring, Powder coated candy purple. Setup for 190 and up lbs rider, for +8 and over swing. 1 hour on this since rebuild - $350 - Front Works Tripe Rate Shocks with reservoirs, these have 1 hour on them since rebuild/revalve (Rebuilt and revalved by I-shock, for +2 wider A-arms, for 200 lbs rider) - $350 - Tail light with billet Biohazard cover, and OHV Tag holder - $40 Shipped - Mattoon Lockout Clutch Assembly with allen bolts (less than 1 horu of ride time) - $50 - Billet Stator Cover (Cascade with BioHazard design) - $150 - Trail-Tech 1-1/8" Low Bend Silver X-bars (with Oury grips) - $40 - Stock Banshee Front Hubs with early spindles - $50 - Brand new NOSS Cool Head with 20cc Domes (bought last week, may return if no one wants to save the $50 extra I spent) - $175 without domes, or $200 - JJ&A Rear Drag Axle, Play axle, 40mm (34" I believe, excellent condition, $660 new) - $400 - Fireball Racing 40mm Rear carrier & Caliper kit (new bearings, this thing has less than 2 hours run time on it) - $125 - Stock Kick Srarter, tight, no rattles - $45 - Ricky Stator - 200w $150 Shipped (for 95-up Banshees) - Ricky Stator Headlights - Duner Setup (like new, 100watt bulbs, cost me $180 plus shipping) - $150 Shipped - Sidewinder Xtreme Chain with Titanium Sprockets - LIKE NEW (this setup cost me over $500... I know, I was an idiot, but it is a great setup. 14tooth front, 41 tooth rear) - $200 for everything, less than 2 hours on the setup - Gas Tank with new Petcock - $40 - Fresh Banshee Transmission (Dune cut by A&S, not an Override, just a great shifting setup for Duning, cost me over $400) - $250 - Front Smooth Buff Tires/w-ITP Wheels - $120 - Polished Rear caliper and +10 over brake line - $100 (shipped) Here is what has sold: - Shearer SB In-Frames - SOLD - Pro-Design Billet Pegs (like new) - SOLD - Gripper Seat - SOLD - A/C Front Bumper (straight) - SOLD - A/C Rear Grab Bar (straight) - SOLD - ProDesign Billet Shifter - SOLD - Billet Aluminum Steering Stem (Like new, less than 2 hours on it) - SOLD - Mattoon Billet Clutch Basket - SOLD - ProDesign Timing Plate - SOLD - Polished stock Clutch Cover with Billet/Smoke Plexi-Cover - SOLD - Ported .080 over jugs (outside polished), Drag Ported by Havoc (includes Weisco Pistons, excellent shape) - SOLD - Virgin Banshee Cases - SOLD - +10 Metal Tech Rear Swing Arm - SOLD - Stainless Brake Lines (setup for +2 front A-arms, cost $80) - SOLD - Front Calipers - SOLD - Trail-Tech Vapor Computer - SOLD - Trail-Tech Banshee 1-1/8" clamp with Vapor holder - SOLD - LoneStar Billet Front Hubs (like new, less than 2 hours on these) - SOLD

Yea, I could do $90 shipped for the bars and clamp setup. They will fit right onto your stock stem.

Here is the newest list, a bunch of items have sold: First, these are the items that are left: - Keihn 35 PWK Airstriker Carbs - $275 (these are like new with polished caps and a throttle cable is included) - Laker Plastics (race cut front and rear black, literally have one weekend on these, they list for over $500) - $350 shipped within the lower 48 states - Powder Coated Frame w/title (Candy Purple over Silver, just coated a month ago) - $400 - Purple Powder Coated Front late model Spindles that match the frame - $75 - +2 Wider, +2 forward Metal Tech Front A-arms, with tie rods and brand new Tie Rod ends (These were $460 + $60 for Powder Coat, and $50 for the new tie rod ends) - $350 - Rear Shock, based on 2002 Stock shock, rebuilt and revalved by I-Shock, with Eibach H.D. Spring, Powder coated candy purple. Setup for 190 and up lbs rider, for +8 and over swing. 1 hour on this since rebuild - $350 - Front Works Tripe Rate Shocks with reservoirs, these have 1 hour on them since rebuild/revalve (Rebuilt and revalved by I-shock, for +2 wider A-arms, for 200 lbs rider) - $350 - Tail light with billet Biohazard cover, and OHV Tag holder - $40 Shipped - Stainless Brake Lines (setup for +2 front A-arms, cost $80) - $50 Shipped - Front Calipers - $50 (bead blasted clean, off of a 2002 Banshee) - Mattoon Lockout Clutch Assembly with allen bolts (less than 1 horu of ride time) - $50 - Billet Stator Cover (Cascade with BioHazard design) - $150 - Trail-Tech 1-1/8" Low Bend Silver X-bars (with Oury grips) - $40 - Trail-Tech Vapor Computer (speed sensor still in the package, this has about 2 hours run time on it, includes temp sensor and all leads, box, and instructions) - $100 - Trail-Tech Banshee 1-1/8" clamp with Vapor holder - $50 - LoneStar Billet Front Hubs (like new, less than 2 hours on these) - $225 - Stock Banshee Front Hubs with early spindles - $50 - Brand new NOSS Cool Head with 20cc Domes (bought last week, may return if no one wants to save the $50 extra I spent) - $175 without domes, or $200 - JJ&A Rear Drag Axle, Play axle, 40mm (34" I believe, excellent condition, $660 new) - $400 - Fireball Racing 40mm Rear carrier & Caliper kit (new bearings, this thing has less than 2 hours run time on it) - $125 - Stock Kick Srarter, tight, no rattles - $45 - Ricky Stator - 200w $150 Shipped (for 95-up Banshees) - Ricky Stator Headlights - Duner Setup (like new, 100watt bulbs, cost me $180 plus shipping) - $150 Shipped - Sidewinder Xtreme Chain with Titanium Sprockets - LIKE NEW (this setup cost me over $500... I know, I was an idiot, but it is a great setup. 14tooth front, 41 tooth rear) - $200 for everything, less than 2 hours on the setup - Gas Tank with new Petcock - $40 - Fresh Banshee Transmission (Dune cut by A&S, not an Override, just a great shifting setup for Duning, cost me over $400) - $250 - Front Smooth Buff Tires/w-ITP Wheels - $120 - Polished Rear caliper and +10 over brake line - $100 (shipped) Here is what has sold: - Shearer SB In-Frames - SOLD - Pro-Design Billet Pegs (like new) - SOLD - Gripper Seat - SOLD - A/C Front Bumper (straight) - SOLD - A/C Rear Grab Bar (straight) - SOLD - ProDesign Billet Shifter - SOLD - Billet Aluminum Steering Stem (Like new, less than 2 hours on it) - SOLD - Mattoon Billet Clutch Basket - SOLD - ProDesign Timing Plate - SOLD - Polished stock Clutch Cover with Billet/Smoke Plexi-Cover - SOLD - Ported .080 over jugs (outside polished), Drag Ported by Havoc (includes Weisco Pistons, excellent shape) - SOLD - Virgin Banshee Cases - SOLD - +10 Metal Tech Rear Swing Arm - SOLD

Awesome thanks!

I have a bunch of stuff laying around that I need to get rid of.... Ignition Switch with key (96 and up style) - $25 Shipped Stock Pegs - $20 + $6 for shipping Stock Stator Cover - $20 shipped Banshee Shifter - $20 shipped DG Rear Grab Bar - $30 shipped Stock hubs and spindles (these are early spindles and hubs to use with early calipers) - $50 + $14 for shipping Late model stock front hubs with brand new bearings and new chrome powder coating (0 hours of run time). The coating looks good, not perfectly smooth, but looks good. - $50 + $10 for shipping

I have no idea what diameter the Aliens are, but these will fit Shearers, and CPI's, I know for sure.