locogato11283

OMG

Haha, alright. End of thread then.

Buy bare pipes from Gary and then send them to Performance Plating in Olathe, KS for chrome.

Huh? Here's the link.. Snipers were clearly the best pipe on these 421 Cubs and the 465 Serval below. http://bansheehq.com/forums/index.php?/topic/174368-4mm-cub-pipe-testing/ http://bansheehq.com/forums/index.php?/topic/171645-redline-racing-10mm-serval-pipe-test/

SNIPERS FFS, no one listens to anything.

SLP won't pull as long as Snipers. They won't make the same peak power.

Snipers will likely make more peak HP/TQ and have a better curve than CPI or Shearer. We tested them at Redline on some Cubs and a Serval. Snipers were better on all motors.

I understand all about that, but if he can buy top of the line parts for the front AND rear for the same price, he will be money ahead. Fireball, Laeger and LSR are all top of the line. And most people probably don't know Fireball makes a lot of other company's a-arms. They just slap a sticker on them.

That hill, in Red Wing, MN, is run/operated by the biggest fucking idiots I've ever encountered in my 10 years of hillclimbing. They could never figure it out. Yea, both bikes are about 3 hours away from being able to run on a hill should we ever decide to go. I doubt we do.

OK, here's one of my hillclimb videos from 2013.. The black/green bike is me with the Laeger LT arms and Fox Evols with Stellar +8 arched ladder swingarm and Fox Podium rear shock. That bike had a 24DM in it. Estimated total suspension parts - $3,500 (front and rear shocks, swingarm, a-arms) The white/blue bike is my brother with Quicksand (only a few people will know that name) arms with Fox Float X shocks and a Turbo Chassis +8 ladder with a Fox Podium rear shock. That bike had an 18DM in it. Estimated total suspension parts - $2,800 (front and rear shocks, swingarm, a-arms) You'll have to excuse my brother's wrecks. He had only climbed a couple times that year on that setup and the jump timing on that hill is shit. The slow motion should give you a good idea of how this stuff works. The jumps are deceiving as well as the speeds. If you REALLY think you need a $3,500 front end after watching this, then this thread is done.

Laeger LT with Fox Float Evols

Laeger, Fireball or even the Alba LT arms will likely be 10x more than he ever needs.

Dude is not a fucking pro and never will be. In this scenario it's a total waste of funds.

Browsing through the post, it seems to me he's looking for a certain look. It's his money. Who cares if he blows it on something he will never use to its full potential? Yes, he can buy parts that are more than adequate and have a metric TON of money left over for other nice parts, but in the end it's his money to waste.

I hope you have enough clues to know the difference between Skeeter and MoronG. MoronG is dumb, but he hasn't thrown the N word around daily or bad mouthed the sponsors in their new product posts.

Arlo will not change the geometry of the chassis. All OEM components will be used.

I'd run Fireball LT arms and Fox Evol shocks. Fox's customer service is garbage. Their phone employees are dumber than fuck. Their shocks are the best I've run. I've got Float, Float X, Evols and Podiums and they're all top notch.

Nice try, but no one is buying your BS. I'm only pointing out that your paint work is pitiful. And your welding? LOL, I won't even go there.

$300

Possum's post has nothing to do with you making parts for anyone. His intent was only to slam guys who do things he can't or to make some money on the side.

Green is like a bulldog with his little pink thinking hanging out.

FFS

Claude totally struck out on this one.