ledofthezep

LMAO....my fav's the:

Yeah,...we predominantly ride at LS. Try to go every couple months at least,..but as much as possible. You may have seen it down there,...last time it was down there it sat in camp(cowboy camp) all weekend with a blown clutch. That was like the 2nd weekend in Oct. I beleive... Be sure & post the next time you all plan on going, will see if any of us can make it... And damn! Sounds like you have quite the ride,...got any pics? If I don't sell/trade the g/f's shee I'll probably purty it up for her over time...

Call me pshyco....but after running my -2 arm in the sand,...if I were to build me a dragger,...I may go with a -2 & a wheelie bar! I pulled the holeshot on every ride I pulled up next to(except the shee's with bottles)...I hooked up great & as long as my nuts were up by the tank the front end would stay down just fine. Maybe I am nuts...

LMAO....Boon,...You're the man! hehe That's put nicely...I'm not so polite!

Shitty deal.... But live & learn,....bet you don't slow down/stop in the middle of a dusty trail anymore... Check out Ricky Stator's axle's....like 200 bones, hear they're pretty good.

Actually,...I believe the # of lady riders on here probably more than trippled just this week! Pretty kewl....good to have ya around! Where do you ride at? Tell us about your banshe...my g/f rides, doesn't race...yet! ...here's the banshee I built for her...had enough of her riding mine! ..hehe

LMAO Meat... You crack my ass up! Bound & Determined, aren't ya.!?hehe

I believe your assumption is correct--look like Fatty's to me too.

That's just plain awesome! Never before seen someone stand by their work like that. I'm sold....as soon as I get the cash I plan on getting a swingarm & probably some arms too. I'll probably just sell my burgard -2 arm so I can get one of yours! My LS's arent' in the best condition & when I start racing seriously I'll need some better ones. I remember a while back you helped me out with some info on fabbing my own arms--well that seems to have fallen through the cracks, so it looks like I'll just buy your arms & say screw my builder. Thanks again & hope to be dealing with you soon.

What brand of damper are you using? Are they worth the $$?

I don't think so,...my g/f's dad has relatively the same problem...is close, but not really a lot of slop like you're talking about... ...does this happen on both sides in conjunction with the direction of the turn? Is your alignment ok? Dunno man,...I'd wait for some more replies...

Chill....was just a joke, I got a chuckle out of it....may as well pack a few joints for the trip as well! But seriously,..we all know that it's not smart to drink & drive; nor drink & ride...you can't stop them all. I know for a fact, I was damn near killed by drunk driver my sophomore year of highschool...longstory that I don't care to tell...luckily I wore my seatbelt & am writing this today. My $.02....Don't ride over your head....know your abilities & build yourself up slowly, take your time--your body & your banshee will thank you.

No shit...."like the sands of glamis, these are the days of the HQ".... Now just waiting to see who kills who & who's mom's sleeping with someone's sister's boyfriend, who's now stuck in a dark forest where it's only raining in a 10x10 area....bla bla...bla..... Amen.

Haha,...what's happen'n 2shees!? Nice ride...did you go w/fullbores or something?..why ya sell'n.? Does ceet make graphics for Alba? ...saw their logo on the front fender graphics...

I hear that! And what's this crap about not duning with a -2 arm? I do & don't have any problems,..shee still handles & hooks up better, is much easier to control & even helped me get the holeshot when dragg'n. It doesn't make your front end feel light & it's not constantly in the air. If you're at all worried about a -2 arm at the dunes w/paddles, don't be---just try it,...you'll be surprized. It's awesome, and handles soo much better in the air. Just MHO... pic of mine(-2 burgard arm) & 8 paddle King's Turbo Paddles.

Right O....a good friend of mine is running your exact same setup but with a UNI. He bought the kit from ProCircuit. It came with & he's running 280's...very smooth, no surprises with the powerband...probably the smoothest hitting shee I've ridden. But since you're in NY,...you'll probably need to go up on that,...perhaps 300's.

I'm not too far away from ya...a bit north, just south of Wichita a ways... I'm running 280's right now...I was down there a couple weekends ago & most of the guys were running 280's-320's. I'm not sure where you're at now, but you may drop down a size on your main since it's not too terribly cold out & try it w/out messing with your clips. Just MHO...

My g/f's shee has the stage IV pipes & silencers. They sound good--preferrable to FMF IMHO...and the low-mid is great, especially with the single carb setup. I need to get her new clutch installed so I can really see how they perform. They came on the banshee when I got it... the fit & look great, no complaints about their performance either.

Looks like a pretty sweet deal, at least the bike looks like it's been taken care of & not ridden very hard.

I dunno man,...haven't been able to find them online myself...they're on my shee in those pics in my sig, the yellow shee has 9 paddle haulers...no complaints about them either, but I prefer the wider 8 paddles that I'm running now. They're the bomb shizznizzle! This is where I bought them: http://www.jimssandtoys.com It's the shop in town in Waynoka, Ok....I paid like right around $168 total for the wheels/paddles, they're 10" rims. They have them in stock, the King's Turbo Paddles & the sand stars on 10inch rims are they're biggest sellers down there. I was going to buy some extreme skat haulers & they told me not to ...instead get the King's paddles over them because they're a better quality tire & hook up just as good if not better, and also a little over $100 cheaper. So I got them & I'm happy now. If you're going to LS, you can pick them up when you get down there. Or I imagine they could ship them to ya also. Ride on!

Doesn't sound like too bad of a deal, what condition is the bike in? Any mods? I'm sure you've seen some pics...??? Look at the value of your ski compared to the value of the cannibal & go from there...that's what I'd be doing...

Don't get gecko's....haven't met a person yet that's had them and liked them. My buddy has them on his EX & hates them. They're ok,...but don't hook for shit compared to others. I've always ran strait paddles, they hook good & you can still slide around & shit just fine. I'm running 8 paddle King's Turbo Paddles, they hook awesome & are better in construction compared to my 9 paddle skats, and hook just as good. They're awesome, and $180 cheaper than skat trak. I let my buddy throw them on his EX since I have Honda rear hubs....he doesn't want to take them off now....

...YeeHawww, bet that's a trip. Nice truck though, good work!

Av Gas doesn't have the lubricating properties that regular gas or race gas does. I've ran it in my shee & didn't have any problems...but I didn't get any gain in performance either, so since I get just as good of performance from 91oct, I'll stick with it. We run Av in all of our stroker VW's in the rails, but throw in a bit of Marvel's Mystery oil to lube it up a bit, never had any problems.

Same here...but with castor927. Do you like chicks with dark or blonde hair....?...same type o'deal if you ask me...kinda like "which pipes are best?"---it's just opinion pretty much. Stick with what suits you the best.