StrokedOutShee

Or a full set

Hey guys, I need these following parts... -4 mil or stock stroke crank, has to be in great condition preferably 4 mil -cases that have no chain wack -stock or after market stator cover -adjustable timing plate -head that is cut for a 4 mil and can be used with 93 octane pump gas -also need seals and gaskets if anybody has brand new ones. -billet impeller -oversized radiator -pancake bearing -modded shift star I am rebuilding a engine that has a bad crank.

Still got everything?

Prices are obo very flexible need this gone someone please buy

Bump

Pistons-100 Cylinders-275 Cool head with 22cc domes-130 All prices are obo. Great shape.

Cmon guys I need this stuff gone right away. Stuff is already packaged and ready to ship!!!!

Hey guys I need one cylinder head stud that fits a stock head. Of if you even have a set of arp's or something I might be interested. Arjan-7789807080 Thanks

Pm's are replied.

$450 obo for the whole top end. Plus shipping.

Bump, c'mon guys help a brother out I need this stuff gone. I'll sell it for cheapppp!

Thanks guys I just ordered one.

Thanks buddy I was really scared ha ha

Hey guys, I just bought a billet water pump impeller and while I was taking the water pump cover off to put it in I took the vent line off and then transmission oil just started to drip slowly. So I then check the hose if there broken or anything and there fine so then I check the crankcase vent if it's plugged and it's not. I then reconnected the crankcase vent hose and I blocked the other hose and I blew into and then the oil was coming out a little faster. What do you guys think it is? The banshee has been sitting for like 2 weeks because I'm waiting on my top end to come. Thanks .

Hey, got this top end that needs to go. This can be used with a stock stroke cranks or you could put some spacer plates (I do have some that are for 65.00mm bore) and run a 4 mil crank. Will sell stuff separate. This is what I have for sale. -Stock stroke or 4 mil top end 65.00mm bore, ported but don't know which one or by who feels like a dune port, no scratches, still can see cross hatches, one stud is missing, low hours. -Pro Design Cool Head with 22cc domes, the domes do have some slight pitting but still can be used, some of the o rings are missing but a o ring kit from F.A.S.T is like 20 bucks I highly recommend getting one. -Wiseco 795 series piston for 65.00 mm bore very low hours they do come with rings and clips but no bearings. -65.00 mm bore 4 mil stroker plates very little use just got some stroker domes so don't need these any more. Give me a offer and we will go from there. Pictures are here http://s1279.photobucket.com/user/StrokedOutShee/library/?view=recent&page=1 I don't know how to upload them here. Its not letting me. If you have any questions or want any more pictures you can pm me or text or call me at 7789807080. Need this shot gone need money for my new banshee. -Arjan Thanks.

Yes I know I should of did porting but trust me I won't even get out of 4th gear max I just wanted a bike to just screw around with nothing tooo crazy. But I will be doing porting later when/if I get bored of stock port. So what do you guys think my pilot should be? Thanks.

Oops sorry guys I have fmf fattys with turbine core's

Hey, guys just recently picked up another banshee from Craigslist (my 96 got stolen now I got a 98) and right when I got it I tore the top end apart and threw those piece of junk stroker plates (I don't know why everyone near me uses them) and got my cylinder bored and honed to 64.50mm also got some new wiesco 795 pistons and I did not port my cylinders so I just got my head cut from Mull. It does have stock carbs and there way out of tune bogging everywhere. It has 420 mains and 30 pilots. My question is what pilots and mains should I run? 150 above sea level and I'm going to be running it at 10 to 20 Celsius , Here are my mods. 4 mil long rod Stock. Cylinders 64.50mm bore no porting Stock carbs No air box just a k and n with outerwear Tors delete, twist throttle Stock head cut for 92 octane Any help will be greatly appreciated. Thanks

He changed the ad up lol he deleted the dyno sheet haha

Aha I know right.

I don't like people who have banshees and they don't know what the fuck there talking about. I am going to try buying this banshee for like 800 :$

It doesn't run! What a surprise eh! Lol http://s1279.photobucket.com/user/StrokedOutShee/media/Mobile%20Uploads/Screenshot_2014-08-17-19-54-48_zpsd26e0beb.png.html?sort=3&o=1 http://s1279.photobucket.com/user/StrokedOutShee/media/Mobile%20Uploads/Screenshot_2014-08-17-19-54-52_zps65e65d90.png.html?sort=3&o=0 http://s1279.photobucket.com/user/StrokedOutShee/media/Mobile%20Uploads/Screenshot_2014-08-17-20-01-03_zpsc5b1cb8c.png.html?sort=3&o=1 http://s1279.photobucket.com/user/StrokedOutShee/media/Mobile%20Uploads/Screenshot_2014-08-17-20-01-09_zps0d82ba91.png.html?sort=3&o=0

Haha this guy is a tool lol its fun

Guy finally responded! This is way too funny. Hehe. http://s1279.photobucket.com/user/StrokedOutShee/media/Mobile%20Uploads/Screenshot_2014-08-17-19-03-39_zps41da3bc2.png.html http://s1279.photobucket.com/user/StrokedOutShee/media/Mobile%20Uploads/Screenshot_2014-08-17-19-03-48_zps4a55ef89.png.html http://s1279.photobucket.com/user/StrokedOutShee/media/Mobile%20Uploads/Screenshot_2014-08-17-19-04-03_zps4abbd1b4.png.html http://s1279.photobucket.com/user/StrokedOutShee/media/Mobile%20Uploads/Screenshot_2014-08-17-19-06-25_zps91852c54.png.html