Search the Community
Showing results for tags 'leaks'.
Found 2 results
Hey guys, I just bought a billet water pump impeller and while I was taking the water pump cover off to put it in I took the vent line off and then transmission oil just started to drip slowly. So I then check the hose if there broken or anything and there fine so then I check the crankcase vent if it's plugged and it's not. I then reconnected the crankcase vent hose and I blocked the other hose and I blew into and then the oil was coming out a little faster. What do you guys think it is? The banshee has been sitting for like 2 weeks because I'm waiting on my top end to come. Thanks .
NEED SAME ANSWERS ASAP! Please!
Jorge_pg posted a topic in Banshee Repairs and ModsOk so I have a 2000 banshee. Mods that I can get off the top of my head are...4mill, +4timing, Coolhead 17 or 18cc domes, v force reeds, boost bottle, toomey t5, r1000 clutch. .020 over Problem I had was I wanted to get rid of stock air box for pods, so i did and while I was at it I removed the coolant resivor, I'm pretty that Dosent affect any thing with the engine tho. so before I had removed the air box it ran really rich and would bog at low throttle and the moment I switched to pods the bike ran super lean and was hard to start with out giving it lots of throttle and when it would finally start no idle at all. So I took it to a local shop (Snuffy Raching) to get it rejetted, the guy told me that the compression was around 40 and other 90!!! I don't know if I'm right but can a banshee even start with that little compression??? So I'm thinking he's doing compression test wrong (tell me if I'm wrong tho) he's telling me also that the rings or pistons might be shot (with out even looking at them yet). So with that being said the bike before would (with air box) would bog at low rpm but would them take off fast and hard with power at higher rpm and now I take it to a shop for some rejetting and I now I might be needing a top end rebuild!?!? Do you guys think he trying to get more money out of me or what could have caused those issues??? Especially the super low compression(if it's even true)!!!??? This is my second banshee and my first time taking one to someone for repairs (because I don't like dealing with jetting) . NEED SOME GOOD SOLID ANSWERS PLEASE BEFORE HE DOSE SOMETHING THAT ISNT NEEDED!!!!