O/CbansheeRider

Thought it was 6 psi for six min. Sent from my iPhone using Tapatalk

Tru dat Sent from my iPad using Tapatalk

I'd move clip to middle put in 300s to start. I'm sea level and think 300 to 320 is where I will be at. I had 310s but went to 300. Ran great but for safety I'm going richer. I've had my bike in woods up to about 1500 ft with 310s at 50 deg and ran good. Just my opinion but I'm no expert. If u can do a plug chop at wot that's the real way. Sent from my iPhone using Tapatalk

And u need to sync carbs after u remove the tops. Sent from my iPhone using Tapatalk

Raise needle to richen. Or did u mean u lowered the clip. Sent from my iPhone using Tapatalk

280 is one up from 270. Bean oil is a premix oil that separates from fuel at low temps. Spelled benol I think. Sent from my iPhone using Tapatalk

That sucks. You can try to put it together see what happens but the threads and such may just pull apart. Spray it down with carb cleaner first. Used stock carbs can probably be had for decent if u have to. Sent from my iPhone using Tapatalk

I've done that before once a long time ago. I just use spray cleaner on mine now. I hear the sonic cleaners are the best but they can do damage to floats and such. Is the metal soft Sent from my iPhone using Tapatalk

Rechamber Sent from my iPhone using Tapatalk

They are just run of mill fab shop not a engine machine shop. Is it really that important to tech amber now. I'm planning on full tear down in a year. I was putting head gasket on and thought I'd get the squish closer since first time this bikes be apart from factory. Sent from my iPhone using Tapatalk

Having it done locally. Just don't wanna take to much. Sent from my iPhone using Tapatalk

So I'm having my head milled and I was going to have them take 20 off of it but a buddy is having his bike rebuilt cause it was pieced together cl special. Mines stock his has Paul turner ported cylinders. The guy doing his is having 35 taken off. Should I have them take more off of mine. I checked squish with .064 solder and had no contact. Sent from my iPhone using Tapatalk

Here's a good one. Sent from my iPhone using Tapatalk

Thx a bunch. I went to 320 mains. Now just Goya go back together then test. Sent from my iPhone using Tapatalk

But that being said u still should probably not listen to me. These other fellows are telling u the proper way to get this bike running good. I just noticed choke. Mine is the same way I just hold it out and sit down kick it three four time cold and starts. One time warm Sent from my iPhone using Tapatalk

Looks like ur kickin like a four stroke two strokes kick a little different. If I got a hard starting two stroke I hold kill switch wit choke on give five medium kicks or so then let go button and let it rip. I have a friend that I got my four stroke from and now he has cr 250 and I swear it looks like he gonna break the kicker off every time. Sent from my iPhone using Tapatalk

I new to these as well but think thats lowest go but should still start. Every used bike (which is all of them) that I've bought needed carb work to run right. Sent from my iPhone using Tapatalk

Put some pics up of my cylinders. Just wondering what u guys think. A local guy I know said looks good. Sent from my iPhone using Tapatalk

Sent from my iPhone using Tapatalk

Sent from my iPhone using Tapatalk

Nice setup Sent from my iPhone using Tapatalk

When I removed plug from intake I could hear air leaking past reeds is this normal? Sent from my iPhone using Tapatalk

So I did a leakdown. It held six pounds for six with no loss of pressure. I'm assuming head unbolts in reverse order by numbers on head. Is there a certain brand of head gasket that's better than others?Also what diameter solder do I use to check squish?thx Sent from my iPhone using Tapatalk

Wow 350s. I'd like to think I'm running her pretty hard. I guess I'll make plug chop priority next time we ride. I don't wanna be to lean fo sure. Thx Sent from my iPhone using Tapatalk

Plugs with one day on them. I think I might need to go 310 main Sent from my iPhone using Tapatalk